Kenwood KXF-W4010, KXF-W6010, CT-203, CT-2050 1, 2

CT-2050/203/KXF-W6010/W4010 (En/M)

Each press of the MODE key changes the setting.

1 “LEVEL” lights up: Recording level setting mode

2 “BAL.” lights up: Recording balance setting mode

3 “BIAS” lights up: Recording bias setting mode (Deck B of the

CT-2050/KXF-W6010 only)

4 “LEVEL”,“BAL.”,and “BIAS”go off: Counter display mode

Set the recording level.

÷Adjust the recording level so that the 0 dB of the peak level indicators

sometimes lights up.

÷The recording level can be adjusted on both decks A and B. (CT-203/

KXF-W4010; Deck B only)

lights up

The cassette deck incorporates the Dolby HX Pro headroom

extension function and auto-bias function to provide a re-

cording with superior high-frequency characteristics.

Since this unit is not designed for recording with metal

(TYPE ) tapes, do not use metal tapes for recording.

How to record (CT-203/KXF-W4010; Deck B only)

Preparation

÷Select by operating the input selector of the amplifier (optional).

÷ In case of recording a FM broadcast,refer to discription of "How to use

the MPX FILTER key".&

÷While pressing the PAUSE (8) key, press the REC/ARM (¶) key.

0dB.

Recording level display.

1Make “Playback (recording) preparation”.

(CT-203/KXF-W4010; Insert a tape in deck

B.)

2(Load a disc in the CD player.) : Keys and control used in the operations described on this page.

Normal recording

1Select the source to be recorded.

2Perform auto-bias adjustment. (The bias adjustment is applied to deck B.)

AUTO BIAS

÷The optimum bias is set in about 40 seconds, after which the deck

enters the stop mode.

÷For a fine adjustment after setting AUTO BIAS, refer to the description

of “Bias level adjustment”. (CT-2050/KXF-W6010 only) &

÷To cancel the auto-bias adjustment operation in the middle, press the

stop (7) key.

÷÷

÷Recording is possible even when the auto-bias setting is omitted.

÷If the amount of remaining tape is small, the auto-bias adjustment may

be canceled in the middle and tape stopped at that position.

÷The bias level is canceled when the eject (0) key is pressed.

1Play a music source.

2Enter the record-pause mode.

PAUSE

REC/ARM

3Press the MODE key and select the "BAL."

mode.

MODE

4Adjust the recording balance.

REC LEVEL/BAL.

/BIAS

∞

MAX/R

∞

MIN/L

Right sound

decreases. Left sound

decreases.

5Press the MODE key and select the

"LEVEL" mode.

MODE

6Adjust the recording level.

REC LEVEL/BAL.

/BIAS

∞

MAX/R

∞

MIN/L

Recording

level

decreases.

Recording

level

increases.

7Stop playing the source.

÷In counter, adjust the recording balance level so that the left and right

displays are the same. You can also check with the Ò and Â peak level

indicators.

Right channel levelLeft channel level

CT-2050/KXF-W6010

CT-203/KXF-W4010

CT-2050/KXF-W6010 only

“AUTO BIAS”blinks. After approximately

40 seconds “AUTO BIAS” lightsup.