Kenwood KXF-W4010, KXF-W6010, CT-203, CT-2050 instruction manual 4

17
CT-2050/203/KXF-W6010/W4010 (En/M)
How to record (CT-203/KXF-W4010; Deck B only)
÷To adjust the bias level, play back the recorded sound and adjust to the
suitable level.Repeat if necessary.
÷The bias can be adjusted to a value of ±3.
Bias level adjustment (Deck B of the CT-2050/KXF-W6010 only)
÷Recording will start.
÷The deck enters the stop mode automatically when the tape has
been recorded till the end.
The MODE key can be used to adjust the bias level.
lights up
Press once.
4Start recording.
1Press the REC/ARM (¶) key.
2Play the music source from the begin-
ning.
¶ REC/ARM
1Press the MODE key and select the "BIAS"
mode.
2Adjust the bias level.
MODE
REC LEVEL/BAL.
/BIAS
∞
MAX/R
∞
MIN/L
The high frequency
decreases. The high frequency increases.
How to use the MPX FILTER key Depending on the tuner, a recorded FM broadcast may
produce a “beat” sound. In this case, press the MPX FILTER
key before recording. To cancel, press the MPX FILTER key
again.
MPX FILTER
lights up
CT-2050/KXF-W6010
CT-203/KXF-W4010
Use this function when recording a radio (FM) broadcasts.
Each press of the MODE key changes the setting.
1 “LEVEL” lights up: Recording level setting mode
2 “BAL.” lights up: Recording balance setting mode
3 “BIAS” lights up: Recording bias setting mode (Deck B of the
CT-2050/KXF-W6010 only)
4 “LEVEL”,“BAL.”,and “BIAS”go off: Counter display mode