GE Monogram All-Refrigerators and All-Freezers Shelves, Storage, drawers, Drawer, removal

Shelves

36” All-Refrigerator and All-Freezer Units

Refrigerator— The upper drawers have individual, adjustable

Storage	humidity controls that let you control the amount
	of cold air entering the drawers.
drawers
	Slide the control all the way to the High setting
	and the drawer provides higher humidity levels
	recommended for most leafy vegetables.
	Slide the control all the way to the Low setting
	and the drawer provides lower humidity levels
	recommended for most fruits.
	Excess water that may accumulate
	in the bottom of the drawers should
	be emptied and the drawers wiped dry.

Drawer	Drawers in the refrigerator/freezer will
removal	stop before coming all the way out, to help
	prevent contents from spilling onto floor.
	To remove a drawer, pull the drawer out and lift
	the front of the drawer up and out of the wire
	holder. Lift the back of the drawer up and out.
	To replace a drawer, place the back
	of the drawer in the wire holder, making
	sure the extensions of the side of the drawer fit
	into the back of the wire holder. Lower the front
	of the drawer into the wire holder. Press firmly
	on the top of the drawer.
Adjustable
	Tempered glass shelves in the refrigerator and
shelves	wire shelves in the freezer enable you to make
	efficient shelf arrangements to fit your family’s
	food storage needs.
	To remove shelves: Tilt shelf up at front,
	then lift it up and out of tracks on rear wall
	of refrigerator/freezer.
	Handle glass shelves carefully. Rough handling
	of tempered glass can cause it to shatter.
	To replace shelves: Select desired shelf height.
	With shelf front raised slightly, engage top lugs in
	tracks at rear of cabinet. Then lower front of shelf
	until it locks into position.

11