Anti-Tip Bracket Installation
36” All-Refrigerator and All-Freezer Units
Level unit
All models have 4-point leveling. The front is supported by leveling legs; the rear is supported by adjustable wheels. Both are accessible from the front of the unit.
•To level the back of the unit, turn the 7/16" hex nut located above the front wheels. Turn clockwise to raise or counterclockwise to lower the unit.
•For front leveling, use a 1-1/4" open-end wrench.
•Adjust height of unit to match installation cutout opening 83-1/2 to 84-1/2". The unit should be level and plumb with cabinetry.
Hex Nut Adjusts
Rear Wheels
Leveling Leg
CAUTION:
The rear leveling wheels and front leveling legs are limited to a maximum height adjustment of 1". If the installation requires more than 84-1/2" height, the installer should elevate the unit on a sheet of plywood or runners. Cabinetry trim could also be added across the top of the opening to shorten the opening. If you attempt to raise the unit more than 1", you will damage the front leveling legs and the rear leveling wheels.
PRUDENCE
Les roues de nivellement arrière et les pattes de nivellement avant permettent un réglage maximal de 25 mm (1 po). Si l’ouverture pour l’appareil ménager a une hauteur supérieure
à2,15 m (84-1/2 po), l’installateur doit élever l’appareil ménager sur une feuille de contre- plaqué ou des glissières. Il est également possible d’ajouter des baguettes de finition des placards sur le haut de l’ouverture afin de la réduire.
Lever l’appareil ménager de plus de 25 mm (1 po) endommage les pattes de nivellement avant
et les roues de nivellement arrière.
