Remote Control Function
STANDBY
SOURCE
SETUP
OPEN/CLOSE
1 2 3
4 5 6
7 8 9
0/10 10+
ENTER
GOTO
PROGRAM
STEP
Press to switch on the unit. Press it again to put the unit in standby mode.
Press repeatedly to select a video/audio source among TUNER, LINE 1, LINE 2 and DVD.
Press to enter/exit the setup menu.
Press to open /close the disc tray.
The digit keys can be used to input numbers or make selection of a track or a chapter, etc.
Press to enter an item in the menu or to confirm and execute a selection.
The direction keys can be used to move the highlight in the menu.
Press to enter the GOTO menu. Use the digit keys to select a title, chapter, track, track time or disc time to play. Press it again to exit.
You can play the contents of the disc in your desired order by programming in the program menu.
Press this button to enter the program menu. Press it again to exit the menu.
Press to temporarily pause a playback. Press it again to resume the playback.
Or, press to resume the normal playback from the fast forward, fast reverse,
Press once to pause a playback, then press [
] to continue the playback; Press it twice to stop a playback and the disc will be reset to the starting point.
Fast forward playback. The available speed are 2X, 4X, 8X, 16X and 32X.
Fast reverse playback. The available speeds are 2X, 4X, 8X, 16X and 32X.
Press to return to the previous chapter/track.
Press to skip to the next chapter/track.
Press repeatedly to advance the video frame by frame. Press [ 
] to resume the normal playback. (Applies to DVD, VCD, MPEG4 discs etc)