Mellerware 27700A manual Temperature Setting Thermostat Settings

Page 3

1.Do not allow the cord to come into contact with any rough, sharp or hot surfaces.

2.Do not pull or tug on the cord to remove the plug from the wall socket. Switch off the unit on the control dial and at the wall socket, then firmly grip the plug to remove from the wall socket.

3.Do not use the cord or plug to carry or transport the appliance, even for a short distance. The appliance has 2 carry handles for this purpose.

4.The appliance will get hot during use. Switch off and remove the plug from the wall socket, then allow the appliance to cool down fully before cleaning or placing in storage.

5.Only use the supplied components when using the appliance. If a different cord, connector or lid is used, the warranty and manufacturer’s liability will be rendered null & void.

6.The lid is constructed out of glass, please handle the lid with care to ensure that remains intact.

7.Do not remove the connector while the appliance is switched on or in use. Switch off the appliance as stated in the above instructions.

8.This appliance should not be used outdoors or for industrial or professional purposes.

USING THE FRYING PAN

*APPLY SOME COOKING OIL TO THE PAN BEFORE USE *

1. PLUG THE UNIT IN:

a.Plug the adjustable temperature controller into the plate socket.

b.Connect the plug directly into the wall socket, never use plug adaptors or extension leads with this product.

2.TEMPERATURE SETTING: THERMOSTAT SETTINGS

1- 90°C

2- 120°C

3- 150°C

4- 170°C

5- 195°C

Turn dial to the desired temperature and the indicator light will illuminate.

3.START COOKING:

a.The pilot light will switch off when the plate reaches the selected temperature.

b.For your reference, it takes about 8 minutes to reach the required temperature on setting No. 5.

4. AFTER USE:

a.Switch the adjustable temperature controller to the OFF position, and unplug the unit from the wall socket.

b.Once the unit has cooled down to room temperature, remove the temperature control unit from the pan.

5. CLEANING:

a.Before cleaning ensure the unit has been unplugged from the wall socket, the adjustable temperature control unit has been removed from the pan and the pan has cooled down to room temperature.

b.Use a damp cloth with some dish washing liquid to clean the cooking surface. Ensure that it is a soft cloth that will not damage the non-stick layer.

c.Use a soft dry cloth to clean the outside of the unit.

d.Never use a scourer or any abrasive material when cleaning the pan as it will damage the non-stick

surface.

d.If the power supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.

Read all instructions before use.

Save these instructions for further reference

SPECIFICATIONS:

ELEC. SPEC.

Please check the rating label indicated on the product.

DIMENSIONS: Size:30cmx30cm / depth 6cm

TEMPERATURE RANGE :

90 C ~ 195 C (1-2-3-4-5 scale)

CORD LENGTH: 100cm

VOLTAGE :

AC230V ~ 50Hz 1500W

ACCESSORIES

Extension cord with adjustable tempreature controller……… 1 PC

Glass Lid……… 1 PC

27700A_IM.indd 3

2012/10/30 09:25:10 AM

Image 3
Contents Electric frying pan Before use Temperature Setting Thermostat Settings 27700AIM.indd 2012/10/30 092510 AM