Auto-Brew, De-scaling, Environmental tip, Other

6.Ensure that the carafe is securely placed in it’s original position.

7.Plug in the coffee maker. The red indicator light will come on.

8.After the brewing process the coffee maker has a 2 hour keep warm function, after which the appliance will switch off automatically.

9.If the glass jar is empty or the keep warm function is not required, turn the appliance off by pressing the”on/off” button again.

Auto-Brew:

•When plugging in the appliance, the LCD display indicates “12:00”.

•Press the “prog” key once. The LCD display will show “clock” flashing in the top right corner.

•Press the “prog” key once more, The LCD display will show “timer” flashing in the top left corner.

•Press the “Hour” key to set the hour.

•Press the “Min” key to set minutes.

•After setting the time, press the “prog” key within 8 seconds to validate the time setting. The green indicator light will be on until it has reached the pro- grammed brew time. Once the programmed brew time is reached the green light will go out and the red light will come on.

Cleaning for external parts of coffee maker

1.Be sure to unplug the plug from wall socket before cleaning.

2.Wait for the appliance cool down before cleaning.

3.The appliance should be cleaned with a soft cloth with mild soap and wiped dry.

4.Never immerse the appliance in water or any other fluid.

De-scaling

To ensure a long lifespan of the coffee maker, you will need to de-scale it from time to time. Frequency will depend on how hard the water is in your area, and how often you use the coffee maker. If you use your coffee maker once or twice a day, the following guide- lines for de-scaling should be used:

•Soft water, every 6 months.

•Medium water, every 2-3 months.

•Hard water, every 6-8 weeks.

If the time it takes to brew a cup of coffee is suddenly increased, it is recommended that the coffee maker be de-scaled. The harder the water is in your area, the more often the coffee maker needs to be de-scaled. The hardness of the water can be advised at your lo- cal waterworks.

Environmental tip

An electronic appliance should, when it is no longer capable of functioning be disposed with least possi- ble environmental damage. The appliance should be disposed according to the local regulations of your municipality. In most cases you can discharge the ap- pliance at your local recycling center.

Caution

•The supply voltage from the wall socket must cor- respond with the voltage stated on the rating label at the bottom of the appliance.

•Use only cold water to fill the water tank!

•Ensure the glass jug is placed properly in its posi- tion when brewing coffee.

•Between the brewing processes switch off the appli- ance and let it cool down for about 5 minutes. Then refill with cold water.

•After the brewing process, always switch off the ap- pliance.

•Disconnect the appliance before cleaning.

•Keep the appliance out of reach of children.

•To switch off the appliance use the on/off switch.

•The control lamp going out indicates when the ma- chine is off.

Other

•The appliance must only be used for purposes as laid out by this instruction manual.

•The supplier will not be held liable for damages caused by improper use of the appliance.

•Only an authorized repair agent may carry out re- pairs on this appliance. Any attempts to repair the appliance without using an authorized repair agent will negate the guarantee.

•In order to locate the authorized repair agent in your area, please consult the supplier.

29801_IM.indd 3

2013/10/28 08:16:16 AM