Mellerware 29801 Control panel, Before using first use, Program instructions Setting the clock

Page 2

IMPORTANT SAFEGUARDS:

When using an electrical appliances, basic safety precautions should always be followed including the following.

Read the instruction manual before using this cof- fee maker.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervi- sion or instruction concerning the use of the appli- ance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Do not touch the coffee maker’s hot surfaces. Use handles or knobs.

To protect against electric shock, do not immerse the power cord, plug or the coffee maker in water or any other liquids.

Turn the coffee maker off and unplug the power cord from the wall socket when the coffee maker is not in use and before cleaning.

Do not operate any appliance with a damaged cord or after the appliance malfunctions, or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examina- tion, repair or adjustment.

The use of accessory attachments not recommend- ed by the appliance manufacturer may result in fire, electric shock or injury to persons.

Do not use the appliance outdoors.

Do not let the power cord hang over the edge of a table or counter or touch any hot surfaces.

Do not place this appliance on or near a hot gas or electric burner or in a heated oven.

Do not use the coffee maker for other reasons than its intended use.

The carafe is designed for use with this appliance, do not use it for other purpose.

Do not place hot carafe on a cold surface.

The appliance is for household use only, not for

commercial use.

The appliance must not be immersed in fluids.

Before using first use:

Before making coffee you should use the coffee mak- er once with water only(without coffee or filter paper).

1.Insert the plug into the wall socket.

2.Fill the jug with cold water, open up the lid, and pour the water from the jug into the water tank, then close lid to its original position.

3.Place glass jug in its original position.

4.Note that the lid should be fitted securely.

5.Start the brewing process by pressing the “on/off” button

Program instructions

Setting the clock:

Setting the time is not compulsory for using the ap- pliance.

When plugging in the appliance, the LCD display indicates “12:00”.

Press the “prog” key once. The LCD display will shows a flashing “clock” in the top right corner. Now you can set the current time.

Press the “Hour” key to set the hour.

Press the “Min” key to set the minutes.

After setting the time, press the “prog” key again. The “clock” will stop flashing

To make coffee:

1.Open the lid of the coffee maker and fill with as much water as cups of coffee you require.

2.Ensure that the water level does not exceed the MAX mark inside the water tank..

3.The water level display on the glass jug indicates the number of cups.

4.Place the filter into the filter holder. Put ground cof- fee into the filter according to your taste.

5.Close the coffee maker lid.

Control panel

29801_IM.indd 2

2013/10/28 08:16:16 AM

Image 2
Contents Digital coffee maker Rec ei p tControl panel Before using first useProgram instructions Setting the clock To make coffeeDe-scaling Cleaning for external parts of coffee makerAuto-Brew Environmental tip29801IM.indd 2013/10/28 081616 AM