Instructions for USE Using Your Kettle

INSTRUCTIONS FOR USE:

USING YOUR KETTLE

It is important that you read these instructions before using your kettle for the first time.

1.Open the lid of the kettle, fill with tap water to the desired level. (Min. capacity is 0.5L and max. capacity is 1.0L). In hard water areas, using purified or filtered water is recommended to reduce the amount of scale build up in the kettle. (Note: You may also fill through the spout, but be careful not to overfill – use water level gauge to check)

2.Close the lid until it clips. Place the kettle on the base and plug into the mains.

3.To switch on the kettle, press the On/Off switch forward (position 1) (CAUTION: Do not place downward pressure on the switch). When the water has boiled the kettle will automatically switch off. You can stop the kettle at any time by pressing the On/Off switch backwards (position 0).

4.Pour slowly and carefully. If you wish to re-boil, please allow a minute for the kettle to cool down.

Warning:

If the kettle has just boiled it will be full of steam that will escape if the lid is opened.

IMPORTANT: Do not open the lid when steam is coming out of the spout.

Before pouring or filling always remember to disconnect from electricity.

Note:

If the kettle is switched on when empty or with insufficient water, then the kettle will switch off automatically to protect against dry boiling. Wait ±15minutes until the heating element cools down, refill with tap water and use as normal. This protection function is not designed for regular use, as it will shorten the life of the element.

If the kettle is overfilled, boiling water may be ejected. The kettle is only to be used with the stand provided (cordless models only).

The appliance must not be immersed in liquid during cleaning.

If the supply cord is damaged, the manufacturer or its service agent or a similarly qualified person must replace it in order to avoid a hazard.

Cleaning and Maintenance

DESCALING

Always ensure that the kettle is disconnected from the mains before descaling. Scaling or furring is a common problem in hard water areas.

1)Fill the kettle to MAX position and boil the water. Remove the kettle from the power socket and the base unit and place it in an empty sink or bowl.

2)Add 50 grams of Citric Acid (Available from Chemists) or other descaler products (available at supermarkets) to the water or as directed.

3)Leave it to stand for approximately 5 minutes or until the effervescence subsides, and then empty

the water. Rinse thoroughly, and wipe the outside of the kettle with a soft damp cloth.

4)Ensure the kettle and electrical connections are completely dry before using the kettle.

Ensure that you descale your filter at regular intervals to avoid impairing the pouring performance of your kettle.

•Always disconnect the plug from the mains before cleaning the kettle and base. Wipe the kettle and base with a moist cloth. Never use an aggressive scourer, steel wool of strong chemical cleaners.

•Descale the kettle regularly. This will depend on the hardness of the water and the frequency of use. Scale build up will significantly reduce the heating efficiency of the kettle.

•Use of a proprietary descaler for kettles is recommended. Follow the instructions provided carefully.

Disposal and the Environment

If your electrical appliance requires replacement or is of no further use, please think of protecting the environment. Contact you local authority for advice as many have facilities for environmentally safe disposal

2 1 2 0 5 specifications

Mellerware 2 1 2 0 5 is an innovative kitchen appliance that exemplifies convenience and efficiency. Designed for modern households, it offers a range of features that cater to the diverse needs of users, making it a valuable addition to any kitchen.

One of the standout features of the Mellerware 2 1 2 0 5 is its multifunctionality. This appliance serves as a combination of a blender, mixer, and food processor, allowing users to perform multiple tasks with a single device. Whether you're blending smoothies, mixing batter, or chopping vegetables, this versatile appliance can handle it all, helping to streamline meal preparation.

The Mellerware 2 1 2 0 5 is equipped with advanced technology that enhances its performance. It boasts a powerful motor that ensures optimal blending and mixing results, reducing preparation time significantly. The appliance also features multiple speed settings, allowing users to customize the blending or mixing intensity based on their specific needs. This adaptability is especially useful for achieving the desired texture in various recipes.

In terms of design, the Mellerware 2 1 2 0 5 is both stylish and functional. Its sleek exterior fits seamlessly into any kitchen décor, while user-friendly controls ensure ease of operation. The appliance is also designed with safety in mind, featuring a secure locking mechanism that prevents accidents during use.

Another notable characteristic is its ease of cleaning. The detachable components are dishwasher-safe, making cleanup a breeze after cooking sessions. This feature not only saves time but also encourages users to engage in cooking more often, knowing that the cleanup process will not be burdensome.

Durability is another hallmark of the Mellerware 2 1 2 0 5. Constructed from high-quality materials, this appliance is built to withstand everyday use without compromising on performance. Its reliability makes it an appealing choice for both novice cooks and seasoned chefs alike.

Overall, the Mellerware 2 1 2 0 5 combines functionality, advanced technology, and stylish design into a single appliance, fulfilling the varied demands of modern cooking. Its multifaceted capabilities, user-friendly features, and ease of maintenance make it a standout choice for anyone looking to enhance their kitchen experience.