S-2™ Stereo Headphones
Pairing Your Headphones to a Mobile Phone or Music Player
1. Turn on your device and activate its Bluetooth® function. Please refer to your device’s user guide for detailed instructions.
2. With the headphones turned OFF, press and hold the CTRL Button for approximately 8 seconds until the headphones LED status ind- dicator alternately flashes blue and red, indicating that the headp- phones are in Pairing Mode.
3. Set the device to search for Bluetooth® devices by following the instructions in the device’s user guide.
4. The device will list the “Cardo
from the list and press OK.
5.When prompted, enter the passkey “0000” (four zeros) and press “OK” to pair your headphones and the device.
6.When the pairing is complete, the headphones’ LED status indicat- tor will flash blue rapidly 5 times followed by a long beep. Your device may confirm that the pairing was successful and the headp- phones’ LED status indicator will begin flashing slowly in blue.
You should now be able to make and receive calls using your headphones and/or listen to stereo music via your headphones.
IMPORTANT: If pairing cannot be completed within 2 minutes while the Pairing Mode is activated, the headphones’ LED status indicator