Dual XHD7714 owner manual HD Radio AM/FM Tuner Operation

XHD7714 OPERATION

HD Radio™ AM/FM Tuner Operation

Analog and Digital Tuning

Seek Tuning

Manual Tuning

Scan Tuning

Band

Storing and Recalling Station Presets

The following tuning functions will access both analog and digital stations. Refer to the HD SEEK mode section on page 10 for instructions on tuning to only digital stations.

Press TUNE nnor TUNE llfor more than one second to seek the next strong station.

When an HD Radio station is selected, an HD Radio logo will begin to flash on the display. In about five seconds, HD or HD1 will illuminate after the radio frequency.

•If "HD" appears, the radio station is broadcasting a higher quality sound. No additional stations are available.

•If "HD1" appears, additional multicast channels (HD2

and/or HD3) are available. Press TUNE llto tune to other available multicast channels.

Press TUNE nnor TUNE llmomentarily to move radio frequency up or down one step at a time.

Press SCN momentarily to preview strong stations on the current band, pausing for five seconds at each. Press SCN again to cancel.

Press BAND to select between FM1, FM2, FM3, AM1 and AM2 bands. Up to six presets can be programmed for each band.

Up to 18 FM stations and 12 AM stations can be stored. including HD Radio stations and multicast channels. To store a station, select the desired band and station. Press and hold the desired preset button (1-6) for more than two seconds. When stored, the preset number will appear in the display. The station can be recalled by pressing the corresponding preset button.

9