KitchenAid KGCD807XBL00 manual Sealed SurfaceBurners, Power failure, Pilotless Ignition, To Clean

Page 5

Power failure

In case of prolonged power failure, the surface burners can be lit manually. Hold a lit match near a burner and turn knob counterclockwise to HIGH. After burner lights, turn knob to setting. The vent fan will not work.

NOTE: The downdraft vent will not operate during a power failure.

Gas tube opening: Gas must flow freely throughout the gas tube opening for the burner to light properly. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the gas tube opening. Keep spillovers out of the gas tube opening by always using a burner cap.

A

Pilotless Ignition

Pilotless Ignition eliminates the need for a constant standing pilot light. Each burner surface has an electric spark igniter. If your burner flame goes out, Pilotless Ignition will automatically spark to reignite the burner.

NOTE: All igniters will spark when any flame is extinguished but only the selected burner will reignite.

If intermittent sparking occurs, rotate the knob clockwise until the clicking (spark) sound ceases.

Smart Port Burner System

This cooktop is equipped with a Smart Port Burner System. The Smart Port Burner System produces a small flame directly under each grate finger and a larger flame between each grate finger.

The visual difference between the ports will be noticeable when the burner is used or when adjustments are made to the flame length.

Sealed SurfaceBurners

A

D

B

E

C

A. Burner cap

B. Burner ports

C. Burner base

D. Gas tube opening

E. Igniter head

IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges.

Burner cap: Always keep the burner cap and head in place when using a surface burner. A clean burner cap and head will help avoid poor ignition and uneven flames. Always clean the burner cap and head after a spillover and routinely remove and clean the caps according to the “General Cleaning” section.

B

A.1-1¹⁄₂" (25-38 mm)

B.Burner ports

Burner ports: Check burner flames occasionally for proper size and shape as shown above. A good flame is blue in color, not yellow. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the burner ports.

To Clean:

IMPORTANT: Before cleaning, make sure all controls are off and cooktop is cool. Do not use oven cleaners, bleach or rust removers.

1.Remove the burner cap and head from the burner base and clean according to “General Cleaning” section.

2.Clean the gas tube opening with a damp cloth.

3.Clean clogged burner ports with a straight pin as shown. Do not enlarge or distort the port. Do not use a wooden toothpick.

4.Replace the burner cap and head, making sure the alignment tab and notch are properly aligned with the burner cap.

A

B

A.Incorrect

B.Correct

5.Turn on the burner. If the burner does not light, check burner head alignment. If the burner still does not light, do not service the burner yourself. Contact a trained repair specialist.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents GAS Downdraft Cooktop Table of Contents/Table des matièresCooktop Safety Table of Contents Table DES MatièresImportant Safety Instructions Cooktop USE Parts and FeaturesCooktop Controls 30 76.2 cm Control PanelTo Clean Power failureSealed SurfaceBurners Pilotless IgnitionSurfaceGrates Cookware CharacteristicsHomeCanning Downdraft Ventilation System CookwareCooktop Care General CleaningSurface Burners and Electronic Igniter PORCELAIN-COATED Grates and CapsDowndraft Ventilation System Troubleshooting Accessories Assistance or ServiceTheU.S.A CanadaLimited Warranty Kitchenaid Cooktop WarrantyItems Excluded from Warranty This limited warranty does not coverPage Votre sécurité et celle des autres est très importante Sécurité DE LA Table DE CuissonImportantes Instructions DE Sécurité Pièces ET Caractéristiques Utilisation DE LA Table DE Cuisson Commandesdela table decuissonNettoyage Brûleurs desurface scellésGrilles desurface Ustensile Caractéristiques Préparationdeconservesà lamaisonUtilisation Nettoyage général Entretien DE LA Table DE CuissonBrûleurs DE Surface ET Allumeur Électronique Grilles ET Chapeaux ÉmaillésSystème DE Ventilation Avec Aspiration PAR LE BAS Rien ne fonctionne DépannageLes brûleurs de surface ne fonctionnent pas Le brûleur de surface fait des bruits déclatementAu Canada Assistance OU ServiceAccessoires Garantie Limitée Garantie DE LA Table DE Cuisson KitchenaidArticles Exclus DE LA Garantie La présente garantie limitée ne couvre pasAll rights reserved W10293056A

KGCD867XBL00, KGCD807XBL00, W10293056A specifications

The KitchenAid W10293056A, KGCD807XBL00, and KGCD867XBL00 are standout appliances in the realm of culinary tools, specifically focusing on automatic dishwashing technology. These models are engineered to provide robust cleaning power, convenience, and the sophisticated design that KitchenAid is known for.

The W10293056A is a dishwasher part that plays a crucial role in ensuring optimal performance and cleaning efficiency for a variety of KitchenAid dishwashers. It is essential for maintaining clean dishes and ensuring long-term durability of the unit. Alongside, the KGCD807XBL00 and KGCD867XBL00 represent contemporary built-in dishwashers that exemplify modern design and functionality.

One of the main features of these models is the advanced cleaning technology, which includes varying wash cycles tailored to different levels of soiling and dish types. This versatility allows users to select the optimal washing setting, whether for lightly soiled glasses or heavily stained pots and pans. In addition, they integrate a soil sensor that detects how dirty the water is and adjusts the wash cycle accordingly, ensuring that each load is cleaned effectively without wasting resources.

These dishwashers also come equipped with a stainless steel tub, which provides excellent insulation and long-lasting durability. The stainless steel interior not only enhances the cleaning performance by retaining heat better but also resists stains and odors, contributing to a cleaner washing environment.

Another significant characteristic is the smart dry technology that enhances drying performance. This feature results in dishes coming out drier and ready to use straight from the dishwasher, minimizing the need for hand drying.

Furthermore, a sleek and quiet operation is a hallmark of these KitchenAid models, allowing users to run wash cycles even during gatherings without disturbing conversations or activities. Their high energy efficiency also serves to minimize water and energy usage, aligning with sustainable practices commonly sought by consumers today.

The aesthetic appeal of the KGCD807XBL00 and KGCD867XBL00 is complemented by a range of elegant finishes and customizable options, allowing them to fit seamlessly into various kitchen decor styles. These appliances are designed not just for performance, but also to make a statement in the modern kitchen environment.

Overall, the KitchenAid W10293056A, KGCD807XBL00, and KGCD867XBL00 stand out as ideal choices for those seeking high-quality dishwashing solutions, combining efficiency, design, and innovative technology to transform the dishwashing experience.
Top Page Image Contents