KitchenAid KUDD03STBL Route Electrical Wiring, Option 1 Right-hand side utility route

3.Adjust leveling legs based on the cabinet opening measurement and the chart below.

X

H	: X	H	: X
17" (43.2 cm)	: 0"	17⁷⁄₈" (45.4 cm)	:⁷⁄₈" (2.2 cm)
17¹⁄₈" (43.5 cm)	:¹⁄₈" (0.3 cm)	18" (45.7 cm)	:1" (2.5 cm)
17¹⁄₄" (43.8 cm)	:¼" (0.6 cm)	18¹⁄₈" (46 cm)	:1¹⁄₈" (2.9 cm)
17³⁄₈" (44.1 cm)	:³⁄₈" (1 cm)	18¹⁄₄" (46.4 cm)	:1¹⁄₄" (3.2 cm)
17¹⁄₂" (44.5 cm)	:½" (1.3 cm)	18³⁄₈" (46.7 cm)	:1³⁄₈" (3.5 cm)
17⁵⁄₈" (44.8 cm)	:⁵⁄₈" (1.6 cm)	18¹⁄₂" (47 cm)	:1¹⁄₂" (3.8 cm)
17³⁄₄" (45.1 cm)	:³⁄₄" (1.9 cm)

4.Place dishwasher in upright position.

Route Electrical Wiring

WARNING

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

Follow all national and local codes and ordinances for completing electrical supply to cabinet.

Option 1: Right-hand side utility route

Route wire through 1½" (3.81 cm) hole located 8" (20.32 cm) above the floor.

After routing the electrical wire through the right-hand hole, attach the wire to back left-hand side of cabinet wall 8"

(20.32 cm) above the cabinet floor. Then continue routing the wire along the left-hand side of cabinet opening to the front of the opening.

Option 2: Left-hand side utility route

Route wire through 1½" (3.81 cm) hole located 8" (20.32 cm) above the floor.

After routing the electrical wire through the left-hand hole, continue routing the wire along the left-hand side of cabinet floor to the front of the opening.

8