KitchenAid KUDS50FVPA, KUDE70FVPA Choose Attachment Option, Models KUDC03IV and KUDS30IV

Page 17

Install Custom Panel – Option 2

(Models KUDC03IV and KUDS30IV)

All models require an accessory option to attach custom panels. Kit Number 8171555 (black), 8171556 (white) or 8171557 (biscuit) are available. To order, call customer service at 1-800-444-1230.

NOTE: A custom full-front panel must weigh no more than 14 lbs (6.3 kg) and must be made to specific dimensions. It is recommended that a cabinetmaker cut the custom panel because of the precise dimensions needed.

IMPORTANT: Use a moisture-resistant sealer on both sides and all edges of the panel to avoid damage from humidity.

NOTE: These dimensions are for frameless custom panel models with a 4" (10.2 cm) console only.

1 Custom panel installation - Dishwashers with control panel on the front

23³⁄₈"

 

 

*25²⁹⁄₃₂" (65.8 cm)

(65.8 cm)

 

 

 

³⁄₄"

 

(19.1 mm)

¹⁄₈" (3.2 mm)

 

¹⁄₈"

(3.2 mm)

*This dimension is for 4" (10.2 cm) toe kick. If the installation needs a higher toe kick, adjust the height of the wood panel accordingly. Not recommended for toe kicks greater than 6" (15.2 cm).

With a TORX® screwdriver, remove three screws from both sides, as shown; hold the outer panel up while removing the screws. Save screws for reinstallation.

2 Custom panel dimensions— Dishwashers with control panel on the front

3 screws per side

outer panel

Gently set outer panel aside. Lay the cutomer-supplied custom panel face down on a non-scratching surface. Position the outer panel on the back of the customer-supplied custom panel as shown; make sure top edge of the outer panel is aligned with the top edge of the customer-supplied custom panel, and both panels are centered side to side.

3 Mark pilot holes

Mark pilot

holes

Mark all four hole locations; remove outer panel and drill ³⁄₃₂" pilot holes ¹⁄₂" (13 mm) deep, in customer-supplied custom panel. Place the outer panel on the back of the customer-supplied custom panel and align holes. Attach outer panel to back of customer-supplied custom panel with four #10 x ¹⁄₂" wood screws (not supplied). If the customer-supplied custom panel is less than ³⁄₄" (1.9 cm) thick where the screws are attached, shorter screws may be required.

4 Attach body panel

 

Align top

Reinstall

edges

 

3 screws

 

each side

Customer-supplied

 

panel

Attach the panel assembly to the door by reinstalling the three screws on each side.

Choose Attachment Option

Excessive Weight Hazard

Use two or more people to move and install dishwasher.

Failure to do so can result in back or other injury.

Using 2 or more people, stand the dishwasher up.

17

Image 17
Contents W10275503B You Need to Table of ContentsTools and Parts Location Requirements Insulation may be compressed Not used on all models Product and Cabinet Opening DimensionsWater Supply Requirements Drain RequirementsElectrical Requirements Use of air gapPrepare Cabinet Opening-New Utilities Prepare Cabinet Opening-Existing UtilitiesPrepare and Route Water Line Flush water supply line Route water supply lineSlide nut and ferrule onto tubing Add 90 elbow fitting to the water supply lineRoute drain hose Install Drain HoseConnect drain hose Waste disposer no air gapPrepare Dishwasher Install Moisture Barrier under a wood countertopPower Cord-Route cord into terminal box Make Power Supply Cord ConnectionRemove panels Remove terminal box coverDetermine Cabinet Opening Custom Panel Dimensions Install the Door Handle on some modelsModels KUDS40FVPA, KUDS50FVPA, KUDE60FVPA, and KUDE70FVPA Install Custom Panel OptionMark line Install custom panelMark pilot holes Attach body panelModels KUDC03IV and KUDS30IV Choose Attachment OptionMove Dishwasher into Cabinet Opening Door falls open- Increase spring tension Check water and drain hose positionCloses too quickly- Decrease spring tension Connect to Water Supply Slide clamp onto connector Make Direct Wire Electrical ConnectionDirect Wire-Route cable into terminal box Connect to DrainDirect Wire-Connect remaining wires Direct Wire-Connect ground wireDirect Wire-Secure cable in strain relief Direct Wire-Reinstall terminal box coverSecure Dishwasher in Cabinet Opening Complete Installation Bottom Sound Pad Installation on some modelsReinstall access panels Check side attachmentReconnect power Power supply cord-Plug into a grounded 3 prong outletReconnect Power Check lower panel edgeAdditional Tips Check OperationIf Dishwasher Does Not Operate Il faut Table des matièresOutillage et pièces Exigences demplacement 60,6 Dimensions Produit et cavité d’encastrementSpécifications de l’alimentation en eau Exigences dévacuationSpécifications électriques Utilisation du dispositif de brise-siphonFermeture de lalimentation en eau Déconnecter la source de courant électriqueLutilisateur possède-t-il déjà des moyens de raccordement? Quel type de connexion lutilisateur emploie-t-il?Cordon dalimentation électrique Préparation du trou Préparation et acheminement de la canalisation d’eauPerçage du trou Raccordement direct Préparation du trouEnfiler l’écrou et la virole sur la canalisation Acheminement de la canalisation dalimentation en eauVidange de la canalisation dalimentation en eau Acheminement du tuyau dévacuation Installation du tuyau d’évacuationBroyeur à déchets sans brise-siphon Pas de broyeur à déchets sans brise-siphonPas de broyeur à déchets avec brise-siphon Broyeur à déchets avec brise-siphonOption C broyeur à déchets avec brise-siphon Option D pas de broyeur à déchets avec brise-siphonPréparation du lave-vaisselle Installation dun serre-câblePlacer le lave-vaisselle sur le dos Dépose des panneauxCordon d’alimentation Conducteur de liaison à la terre Raccordement du cordon dalimentationÉvaluation de l’ouverture dencastrement du placard Configuration du câblageMesure de louverture dencastrement du placard Tableau de réglage Hauteur du lave-vaisselleDimensions du panneau personnalisé Installation de la poignée de porte sur certains modèlesInstallation de la poignée de porte Planchers surélevés Ajouter des cales si nécessaireMarquage de laxe Installation du panneau personnalisé OptionMarquage des avant-trous Modèles KUDS40FVPA, KUDS50FVPA, KUDE60FVPA, et KUDE70FVPAFixation de la poignée Installation du panneau personnaliséFixation du panneau principal Modèles KUDC031V et KUDS301VSortir le bride Choix de l’option de fixationInsérer la bride Option 1, Fixation au plan de travailInsertion des boutons en plastique Sectionnement de lextrémité de la brideMise en position verticale du lave-vaisselle Option 2, Fixation au côté du lave-vaisselleInsertion du lave-vaisselle dans louverture du placard Ouverture et fermeture de la porteRaccordement à l’alimentation en eau Méthode recommandée Méthode facultativeVérification de laplomb et réglage des pieds si nécessaire Raccorder le raccord coudé de 90 à la valveRaccordement électrique direct Raccordement au circuit dévacuationPosition définitive de la bride de tuyau Enfilement de la bride sur le raccordRaccordement direct Fixation du câble dans le serre-câble Raccordement direct Raccordement du fil de mise à la terreRaccordement direct Raccordement des fils restants Vérification de lespacement Lintérieur Fixation du lave-vaisselleVérification de la distance de dégagement pour la porte Vérification de la fixation latérale Achever linstallationRéinstallation des panneaux daccès Serrage des vis Inspection de la rive de panneau inférieureReconnexion de la source de courant électrique Rétablir la source de courant électriqueConseils supplémentaires Contrôle du fonctionnementSi le lave-vaisselle ne fonctionne pas Page Page Page All rights reserved
Related manuals
Manual 52 pages 48.13 Kb

KUDS40FVPA, KUDS50FVPA, KUDE70FVPA, KUDC03IV, KUDS30IV specifications

The KitchenAid W10056407A and its associated dishwasher models, including KUDE60FVPA, KUDS40FVPA, KUDS50FVPA, and KUDE70FVPA, represent a blend of innovation, efficiency, and elegant design in today’s modern kitchen appliances. These models are designed to provide exceptional cleaning power while being user-friendly.

One of the standout features of these dishwashers is their Advanced Clean Water Wash System, which uses a combination of powerful jets and filtration to ensure that every dish is cleaned thoroughly, even the dirtiest pots and pans. This technology minimizes the need for pre-rinsing, saving both time and water. The Efficient Wash Cycle allows users to customize the cleaning according to their needs, providing options for heavy-duty washing or light cycles for delicate items.

Another remarkable feature is the ProWash Cycle, which automatically determines the optimal cycle for the load being washed. This technology analyzes soil level and adjusts the wash time and water usage accordingly, making it a smart choice for those who want to conserve resources without sacrificing cleaning results. Additionally, the models boast a Quiet Operation, with advanced sound insulation technology that ensures a near-silent experience, allowing users to carry on with other activities without being disturbed by noise from the dishwasher.

The adjustable racks in models like the KUDE70FVPA make loading and unloading a breeze. The upper rack can be adjusted to accommodate taller items without compromising space in the lower rack, enhancing the overall capacity of the dishwasher. Furthermore, the complete stainless-steel interior not only adds to the durability of the appliance but also contributes to better drying performance, as it helps retain heat during the drying cycle.

These KitchenAid dishwashers also come equipped with a high-efficiency spray arm that ensures even water distribution, reaching every corner for a comprehensive clean. The sleek design and innovative features make these models not only functional but also aesthetically pleasing, complementing any modern kitchen decor.

In terms of energy efficiency, these appliances are Energy Star certified, confirming they use less energy and water without sacrificing performance. This commitment to environmental sustainability reflects KitchenAid's dedication to quality and responsibility, making these models an excellent choice for eco-conscious consumers. Overall, the W10056407A, KUDE60FVPA, KUDS40FVPA, KUDS50FVPA, and KUDE70FVPA dishwashers provide a perfect blend of performance, convenience, and style.