KitchenAid KUDS01FK manual Loading Top Rack, Loading Bottom Rack

Loading Top Rack

The top rack is designed for cups, glasses, and smaller items. Many items, up to 9 in. (22 cm), fit in the top rack. (See recommended loading patterns shown.)

NOTE: The features on your dishwasher rack may vary from the drawings shown.

10 place setting

12 place setting

■Place items so open ends face down for cleaning and draining.

■Load glasses and cups in top rack only. The bottom rack is not designed for glasses and cups. Damage can occur.

■Place cups and glasses in the rows between tines. Placing them over the tines can lead to breakage and water spots.

Cup and glass load

■China, crystal, and other delicate items must not touch each other during dishwasher operation. Damage may occur.

■Load plastic items in the top rack only. Only plastic items marked “dishwasher safe” are recommended.

■Load plastic items so the force of the spray does not move them during the cycle.

■To avoid chipping, do not let stemware touch other items.

■Small bowls, pans, and other utensils can be placed in the top rack. Load bowls in the center section for best stability.

Loading Bottom Rack

The bottom rack is designed for plates, pans, casseroles, and utensils. Many items, up to 13 in. (33 cm) tall, fit in the bottom rack. (See recommended loading patterns shown.)

NOTE: The features on your dishwasher rack may vary from the drawings shown.

10 place setting

12 place setting

■Do not load glasses, cups, or plastic items in the bottom rack. Load small items in the bottom rack only if they are secured in place.

■Load plates, soup bowls, etc., between tines.

■Overlap the edges of plates for large loads.

■Load soup, cereal, and serving bowls in the rack in a variety of ways depending upon their size and shape. Load bowls securely between the rows of tines. Do not nest bowls because the spray will not reach all surfaces.

Utensil load

7