COOKTOP CONTROLS - SMART KNOB MODELS
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The
To keep cooked foods warm or to heat serving dishes, the surface cooking area can be set to WARM.
For maximum element operation, all
NOTE: Where 240V installation is not available, this cooktop will automatically adjust to 208V operation.
Use the following chart as a guide when setting heat levels.
SETTING | RECOMMENDED USE | |
|
|
|
Hi | ■ | Bring liquid to a boil. |
|
|
|
Medium High | ■ | Hold a rapid boil. |
Between Med & Hi | ■ | Quickly brown or sear food. |
| ||
|
|
|
Med | ■ | Maintain a slow boil. |
Medium | ■ | Fry or sauté foods. |
| ■ Cook soups, sauces and | |
|
| gravies. |
|
|
|
Medium Low | ■ | Stew or steam food. |
Between Med & Lo |
|
|
|
|
|
Lo | ■ | Simmer (range of simmer |
SIMMER |
| temperatures). |
|
|
|
Warm | ■ | Keep cooked foods warm. |
|
|
|
Melt | ■ | Melt chocolate or butter. |
|
|
|
Dual/Triple Circuit | ■ | Home canning. |
Elements | ■ | |
|
■ Large quantities of food.
REMEMBER: When cooktop is in use, the entire cooktop area may become hot.
To Use:
1.The cooktop control can be set anywhere between HI and MELT.
2.Push in and turn to desired setting.
Hot Surface Indicator Lights (on Smart Control models)
The Hot Surface Indicator Lights are located next to each of the cooktop control knobs. The Hot Surface Indicator Lights will glow as long as any surface cooking area is too hot to touch, even after the surface cooking area(s) is turned off.
A
A. Hot surface indicator light
If the cooktop is on when a power failure occurs, the Hot Surface Indicator Lights will remain on after the power is restored to the cooktop. They will remain on until the cooktop has cooled completely.
Power Light
Each cooktop has a Power On light. The light will glow when any burner is on.
9