being played. |
|
G)PLAY | Comes on when a disc is playing. |
H)PAUSE | Comes on, together with the play indicator, when the disc is in the |
| pause mode. Goes off when the pause mode is canceled. |
NORMAL CD PLAYBACK
1Press POWER button to turn the system on.
2Set the FUNCTION selector to the CD position. The CD display lights and the changer begins to search all three disc pockets for CDs. If no discs are found the display indicates NO DISC.
3The CD pockets are numbered (1.2.3). these numbers correspond to the disc indicators in the CD display. The disc indicators do not change position. They always remain. however the disc symbol will flash to show which disc is in the play position.
Place up to 3 CDs in the pockets of the tray. Place the disc you want to play first in pocket #1.place the disc you want to play second in pocket #2.and so on. To load three CDs in the tray it will be necessary to rotate the tray to expose the third pocket. After you load the first two discs press the DISC SKIP button to rotate the tray and then loaded with the printed sides facing up. If the disc is not properly centered in the pocket it may move when you close the drawer. This could jam the mechanism or possibly damage the disc, so be sure to load the discs properly.
4After you have loaded up to 3 CDs press the PLAY/PAUSE button. The display will show the Total number of tracks and total playing time of disc is in the play position.
NOTE:
In the normal playback mode the changer always stops after it has played the disc in pocket #3.So if you want to play all three discs in sucession, you must start playback with DISC 1. If you only load one disc in the changer, it may be placed in any of the three pockets. The changer will search all three pockets until it locates the disc and then playback will begin.
When the last track of the last disc has been played the changer stops and the display will show the total tracks and playing time of the first disc again.
SKIP TRACK FORWARD OR BACK BUTTONS
During CD playback you may skip tracks forward or back by pressing the forward or back track skip buttons. Press the forward button once to skip to the beginning of the next track. Press twice to skip two tracks etc.
Press the skip back button once to skip back to the beginning of the track being played. Press twice to skip back to the beginning of the previous track etc.
You may also use the skip controls to start playback from a specific track on a disc. Press the STOP button to stop the disc if necessary. Then press the forward button until the display shows the desired track. Press PLAY/PAUSE to start playback.