Panel D

B)Latch dishwasher door shut. Grasp dishwasher door frame and slide dishwasher off of shipping base or cardboard and into cabinet opening. Do Not push on dishwasher door panels or console. Center dishwasher in opening. Check that front leveling legs are firmly against floor.

@Align dishwasher door with cabinet front - not doors.

+Place a level

against interior flange in the positions shown above. Level dishwasher front to back and side to

side by adjusting leveling legs.

Door and racks not shown for clarity.

Numbers correspond to steps.

SOpen dishwasher door and remove bottom rack. Remove all shipping materials, including foam shipping pieces from upper corners of door. Do Not remove the white plastic plug buttons from the side of the door or the plastic bumpers from the front corners of the lower rack. Place a newspaper or large sheet of paper over bottom of dishwasher to protect pump area when securing dishwasher to countertop.

Personal Injury/Product Damage

Hazard

l The dishwasher must be secured to the countertop to keep it from tilting when the door is open.

l If dishwasher is to be installed freestanding, not in a cabinet enclosure, dishwasher must be secured to the floor. (See appropriate installation step.) The dishwasher must be enclosed using the appropriate kit. Check with your local dealer for the kit required for your installation.

l Do Not drop screws in dishwasher tub. If screws should fall into pump, pump and motor damage may occur.

Failure to follow these instructions may result in personal injury or product damage.

*The dishwasher must be secured to the countertop or floor to prevent tipping when dishwasher door is opened.

Countertop attachment:

Disconnect brackets located at top corners of flange. Reattach brackets with bracket end facing away from dishwasher. Using a l/8” drill bit, drill 3/4” deep starter holes through bracket holes into underside of countertop. Do Not exceed 3/4” depth. Attach brackets to underside of countertop using two screws from parts bag. Make sure screw heads do not interfere with door.

, equally spaced,.

Open dishwasher door approximately 3” and check for equal spacing between inner door and tub sides. If space is unequal, loosen screws fastening dishwasher to countertop and shift tub. Check that dishwasher is level and reattach screws.

inlet valved

street elbow

NPT

oWater inlet valve has 3/8” internal pipe thread.

If galvanized pipe is used, connect a 3/8” NPT street elbow to water inlet valve using pipe-joint compound.

If 90” compression elbow is used, connect 3/8” end to water inlet valve. Use pipe-joint compound. Do Not use pipe-joint compound on the compression end.

Tighten connection.

Use pipe-joint compound to connect water line to street elbow. Do Not use pipe-joint compound to connect water line to compression elbow.

Tighten connection.

Floor attachment:

leveling leg

Place screw-type clamp over straigh: end of connector drain hose. Attach drain hose to connector drain hose with screw-type clamp. Check that drain hose and connector drain hose are not twisted or kinked and that the connection is secure.

Attach dishwasher to floor using l/4” lag bolts through holes in each side of dishwasher frame, being careful to keep dishwasher level.

97415 14 specifications

The KitchenAid 97415 14 is a versatile kitchen appliance designed to enhance the culinary experience at home. This stand mixer stands out for its powerful performance, robust construction, and range of features that cater to both novice cooks and seasoned chefs.

One of the key highlights of the KitchenAid 97415 14 is its extensive mixing capacity. With a large 4.5-quart stainless steel bowl, it is ideal for handling recipes that require significant amounts of ingredients. Whether you are whipping cream, kneading dough, or mixing batter, the bowl's capacity allows for large batches, making it perfect for family gatherings or holiday baking.

This stand mixer is powered by a reliable 325-watt motor. The motor ensures consistent mixing results, tackling even the densest dough with ease. Coupled with a direct drive transmission, the mixer maintains speed and power, optimizing efficiency and performance during food preparation.

The KitchenAid 97415 14 offers a variety of speed settings, with ten different options to choose from. This allows users to customize their mixing process for different recipes, ensuring precise results every time. The slow stir speed is perfect for incorporating dry ingredients, while higher speeds provide the power needed for heavy mixtures.

Durability is another aspect where the KitchenAid 97415 14 shines. The mixer features a die-cast metal construction, providing stability during operation and extending its lifespan. Additionally, the iconic tilt-head design allows for easy access to the bowl and attachments, simplifying the process of adding ingredients or changing attachments.

Speaking of attachments, this stand mixer is compatible with a range of KitchenAid accessories, including pasta makers, food grinders, and vegetable slicers. This adaptability makes the KitchenAid 97415 14 a multifunctional tool, capable of performing various tasks beyond mixing.

In terms of user experience, the mixer is designed with ease of use in mind. The ergonomic handle on the bowl provides a comfortable grip during pouring, while the pouring shield helps to prevent messes. The mixer is available in a variety of colors, allowing users to choose a style that complements their kitchen decor.

Overall, the KitchenAid 97415 14 is a powerful and stylish stand mixer that combines performance with functionality. Its robust construction, versatile attachments, and user-friendly features make it an essential addition to any kitchen, empowering home cooks to explore their culinary creativity. Whether you’re baking bread, whipping meringue, or preparing delectable frostings, this mixer delivers exceptional results every time.