Option 1 Attach dishwasher side mount | KitchenAid 8573714B, 528534

5.Open the drawer.

6.Press in the right-hand runner clip and push it back about 6” (15.2 cm). Repeat with the left-hand runner clip.

NOTE: When removing the drawer there is limited range of movement due to the attached water hoses.

runner clip

7.Lift the right edge of the drawer off its runner. Slide that runner back into the dishwasher.

8.Lift the drawer completely off the left-hand runner.

9.Set the drawer down flat on the protective covering. If the drawer cannot be set down flat due to space constraints, rotate it to the left onto its side, and place on the protective covering. The drawer will need to be securely supported at a height even with the cavity.

Bottom mount hole locations

10.Slide the left-hand runner back into the dishwasher.

11.Make sure chassis position is still aligned and mark holes in the bottom (if using bottom mount option).

Option 1: Attach dishwasher (side mount)

1.The dishwasher side attaching tabs are accessed through holes in the sound insulation.

IMPORTANT: For best installation, use all four attaching tabs. Add spacers to side of cabinet if needed to attach screws. Refer to “Cabinet dimensions/requirements” section.

2.Secure the attaching tabs to the cabinet using #8 Phillips head screws.

NOTE: Before securing the dishwasher, confirm that the chassis is still properly aligned.

side mounting bracket

3.Pull one of the bottom drawer runners all the way out. Make sure the latches on the back of the drawer runner are facing forward.

drawer

runner latch

latch bracket

4.If the bottom drawer was rotated, rotate the drawer to unwind the hoses and then put the drawer on the extended runner, making sure the hoses are looping upward.

5.While holding on to the drawer, fully extend the remaining drawer runner. Follow the procedure in step 3 to place the drawer on the remaining runner.

6.Make sure both runner clips have snapped into place. If they have not, pull the runner clips forward until they do.

7.Close the drawer.

Option 2: Attach dishwasher (bottom mount)

1.Temporarily reinstall drawer and remove entire dishwasher from cavity.

2.Drill a 3/16” diameter pilot hole at each of the three locations marked.

3.Replace dishwasher in opening and realign with chassis mark.

4.Remove drawer and install the three 1” hex head screws and the three 9/16” washers (all three screws and washers must be used) using a minimum 20 in/lb torque.

5.Reinstall the drawer,

following steps 3 through 7 in Option 1.

6. Check unit for side-to- side movement. If it moves, remove the drawer and retighten the screws. Then reinstall the drawer.

Hex head screws and washers

8573714B, 528534 specifications

The KitchenAid 528534, 8573714B is a highly versatile and robust kitchen appliance that stands out for its ability to enhance culinary creativity and efficiency. This innovative product is part of KitchenAid's commitment to delivering high-quality kitchen tools that cater to both amateur cooks and professional chefs alike.

One of the standout features of the KitchenAid 528534, 8573714B is its exceptional power and performance. Equipped with a powerful motor, this appliance ensures smooth operation, making it easy to handle a variety of tasks, from mixing dough to preparing sauces. The robust design does not compromise on speed, allowing users to achieve the perfect consistency and texture for their culinary creations.

Another remarkable characteristic of this model is its innovative planetary mixing action. This technology allows the mixing tool to rotate in one direction while revolving around the bowl in the opposite direction. This unique method ensures that every ingredient is thoroughly mixed, providing consistent results every time. With this appliance, cooks can say goodbye to unmixed ingredients and enjoy perfectly blended mixtures for their recipes.

The KitchenAid 528534, 8573714B also features a variety of attachments, making it highly adaptable to different cooking needs. From whisking to kneading, the range of included accessories allows users to customize their cooking experience. The available attachments include a dough hook, flat beater, and wire whip, each designed to perform specific tasks with precision and ease.

Another notable technology integrated into this appliance is its easy-to-use control panel. With intuitive controls and multiple speed settings, users can easily adjust the mixing speed to suit their specific task. Whether working with delicate ingredients or handling heavy dough, the versatility of the speed settings ensures optimal performance.

In addition to its functional features, the KitchenAid 528534, 8573714B is built to last. The sturdy construction and high-quality materials ensure durability, making it a worthy investment for any kitchen. Its sleek and stylish design also adds an aesthetic appeal, complementing any kitchen décor.

In conclusion, the KitchenAid 528534, 8573714B combines power, performance, and versatility in a single appliance, making it an essential tool for any culinary enthusiast. With its advanced mixing technology, customizable features, and durable design, this kitchen aid not only simplifies meal preparation but also inspires creativity in the kitchen.