Yellow |
Red
ENGLISH 45
Remove the Automatic Milk Frother from the steam/hot water wand.
Remove the “INTENZA+” water filter (if supplied) from the water tank if it was installed.
Press the “ | ” button. Press the “ | ” button until the following |
display is shown. |
|
Press the “” button to enter the descaling menu.
Note:
If you press the “" button by mistake, press the “" button to quit.
Remove the water tank and pour the entire content of the Saeco des- caling solution. Fill the water tank with fresh water up to the MAX level.
Place the water tank back into the machine.
Place a large container (1.5l) under the steam/hot water wand and the dispensing spout.