Philips HD8881, HD8752 user manual There is no water

		ENGLISH 55
Machine actions	Causes	Solutions
The machine grinds the coffee beans	There is no water.	Fill the water tank and prime the circuit (see "Us-
but no coffee comes out.		ing the Machine for the First Time" chapter).
(See note)
	The brew group is dirty.	Clean the brew group (see the "Weekly Cleaning
		of the Brew Group" chapter).
	The circuit is not primed.	Prime the circuit (see "Using the Machine for the
		First Time" chapter).
	This might occur when the machine is	Brew a few cups of coffee as described in the
	automatically adjusting the dose.	“Saeco Adapting System”chapter.
	The dispensing spout is dirty.	Clean the dispensing spout.
Coffee is too weak.	This might occur when the machine is	Brew a few cups of coffee as described in the
(See note)	automatically adjusting the dose.	“Saeco Adapting System”chapter.
Coffee is brewed slowly.	The coffee grind is too fi ne.	Change coffee blend or adjust the grind as
(See note)		explained in chapter "Adjusting the Ceramic
		Coffee Grinder".
	The circuit is not primed.	Prime the circuit (see "Using the Machine for the
		First Time" chapter).
	The brew group is dirty.	Clean the brew group (see the "Weekly Cleaning
		of the Brew Group" chapter).
Coffee leaks out of the dispensing	The dispensing spout is clogged.	Clean the dispensing spout and its holes.
spout.
Milk does not froth.	The Automatic Milk Frother is inserted too	Leave the Automatic Milk Frother to cool down.
	deep. No milk is being suctioned.	Move it slightly downwards. Reposition it in its
		correct seat.
Frothed milk is too cold.	The cups are cold.	Preheat the cups with hot water.

Note:

These problems can be considered normal if the coffee blend has been changed or if the machine has just been installed. In this case wait until the machine performs a self-adjusting operation as described in "Saeco Adapt- ing System" chapter.