14
9Do not use an object with sharp edges to clean the water inlet on the machine.
10Rinse the parts with fresh water after cleaning and put them back into the machine.
11Clean the water distribution disc with a moist cloth.
Be careful when you do this; make sure that the rubber sealing ring does not get stuck under the edge of the water distribution disc. If it does, the coffee machine will start leaking!
Flushing
If you have not used the coffee machine for three days, you have to flush it
with fresh water before you use it again. Flush the machine in the following way:
1Fill the water reservoir with cold water up to the MAX indication
and put it back into the machine.
2Put the
machine without pod(s).
3 Close the lid and lock the lever.
4Put a bowl (with a capacity of at least 1.6 qt./1.5 litres) under the coffee spout to collect the water.