16
7Empty the water reservoir to remove the last vinegar or mixture of descaler and water.
8Rinse the machine at least 3 times by repeating steps 1 to 5, now using fresh water.
,Do not refill the water reservoir with used hot water.
,Discard hot water each time.
9Discard the used coffee pod and clean the pod holder after descaling to prevent the sieve in the center from getting clogged.
This coffee machine has no other
Storage
If the coffee machine has already been used and therefore has been flushed with water, it may only be used and stored in a
Assistance
For assistance, call toll free:
www. senseo.com
Information is available 24 hours a day, 7 days a week.
Troubleshooting
If you have a problem, you may find the solution in the table below. If the table does not provide the solution to your problem or if you have a question, see chapter ‘Assistance’.
ProblemSolution
The indicator light continues You have not yet flushed the coffee machine (see chapter ‘Preparing the
to blink slowly. | machine for use’). |
| You have used the SENSEO\ coffee machine at an altitude higher than |
| 6800 Ft. / 2200 m above sea level.This has caused the water in the |
| machine to start boiling before it has reached the required temperature, |
| which prevents the machine from functioning properly. Switch the |
| machine off and no longer use it at altitudes higher than 6800 Ft. / 2200 m |
| above sea level. |
The SENSEO\ coffee machine does not produce coffee when used for the first time.
You have not yet flushed the coffee machine. When you use the machine for the first time, you have to flush it before you start brewing coffee (see chapter ‘Preparing the machine for use’).
The indicator light continues Make sure that: to blink rapidly.
the water reservoir has been properly placed;