Connection Descriptions

XIA4225 INSTALLATION

NOTE: Be sure to follow specific instructions included with your amplifier installation kit (not included with this amplifier). The information below should be used a general guideline only.

Power Wire (+12V)

•Disconnect negative battery terminal before proceeding. Consult a qualified technician for instructions if you are unsure.

•Plan wire routing before cutting any wires to length. Begin by routing the power +12V wire from the battery to the amplifier location. Use a grommet when running wires through the firewall or metal openings. Avoid running the power wire near existing vehicle wiring to prevent induced noise from entering the audio system.

•Use extreme caution when drilling holes to avoid damaging fuel lines or existing vehicle wiring.

•The +12V wire MUST be fused within 18" of the battery for protection of the vehicle’s electrical system.

Ground Wire (GND)

•The amplifier ground wire should be as short as possible. Choose a clean unpainted section of metal or the vehicle chassis when attaching the ground connection.

Be sure to clean the area of any dirt or grease.

Remote Turn-on Wire (REM)

•The remote turn-on wire connects to the head unit's amplifier turn-on lead or power antenna output.

Speaker Wires

•Choose adequate gauge speaker wire depending on your exact amplifier/speaker combination. Be sure to observe polarity when connecting.

•Do not ground any speaker wires or connect any speaker wires together.

Illuminite Circuit (12VDC Output - for DUAL illuminite speakers only)

•Use 18-gauge or larger wire for making the connections to the illuminite terminals of DUAL illuminite speakers ONLY. Be sure to observe polarity when connecting.

•Do not ground any illuminite output wires or connect any illuminite wires together.

Input Signal

•The amplifier's input signal connects to the head unit's low level (RCA) or high level (speaker wire) outputs.

•Low level input signal deliver the best performance. If unavailable, use the high level inputs - when interfacing with factory head unit for instance.

CAUTION

•Do not use both low and high level inputs at the same time - connect only one or the other.

XIA4225 specifications

The Dual XIA4225 is a state-of-the-art automotive diagnostic tool designed to provide comprehensive vehicle analysis and enhance the productivity of automotive technicians. This device stands out in the market due to its dual-channel architecture, which allows users to perform simultaneous diagnostics on multiple vehicle systems. This feature significantly reduces the time required for troubleshooting and repairs, making it an asset in high-demand service environments.

One of the main features of the XIA4225 is its extensive vehicle coverage. It is compatible with a vast array of makes and models, including both domestic and foreign vehicles. This broad compatibility ensures that technicians can rely on the tool for a wide range of service tasks across different vehicles. Additionally, it supports multiple communication protocols, such as OBD-II, CAN, and J2534, facilitating seamless connections to various vehicle systems.

The user-friendly interface of the Dual XIA4225 is another notable characteristic. With a high-resolution touch screen display, technicians can easily navigate through diagnostic menus and view live data streams in real time. The intuitive layout reduces the learning curve for new users, allowing them to quickly harness the full potential of the tool.

The Dual XIA4225 also features advanced diagnostic capabilities, including code reading and clearing, live data monitoring, and freeze frame data retrieval. Technicians can access manufacturer-specific diagnostic trouble codes (DTCs) to identify issues accurately, ensuring precise diagnosis and effective repair solutions. By providing detailed vehicle information, users can make informed decisions, ultimately leading to improved customer satisfaction.

Durability is an essential aspect of any diagnostic tool, and the Dual XIA4225 does not fall short in this regard. Built with rugged materials, it is designed to withstand the rigors of a busy workshop environment. The device comes with a reinforced casing that protects it from drops, spills, and other potential damage, enhancing its longevity and reliability.

Moreover, the Dual XIA4225 incorporates wireless connectivity options, enabling users to access software updates and cloud-based features with ease. This capability ensures that technicians always have the latest diagnostic information and tools at their fingertips, boosting their efficiency and productivity.

In summary, the Dual XIA4225 is an exceptional diagnostic tool that combines versatility, advanced functionality, and user-friendly design in a robust package. Its dual-channel capability, extensive vehicle coverage, and advanced features make it an essential tool for automotive professionals seeking to optimize their workflow and deliver high-quality service to their customers.