KitchenAid 5KSB555AWH, 5KSB555AER Service Environment, Electrical Considerations, Technician

Page 2

BLENDER SERVICE MANUAL

SAFETY GUIDELINES

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:

You can be killed or seriously injured if you don't immediately follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

This service manual is written for the professional service technician who is familiar with the KitchenAid blender. The following guidelines should be adhered to when servicing this product.

Service Environment

•The workplace will be dry and sanitary at all times and all units should be inspected for cleanliness before any work is started.

•Visually inspect the unit requiring service in a well-illuminated area.

•A mild, non-abrasive dishwashing soap solution and clean towel can be used to wash any unit requiring attention.

•The hands of the Service Technician should be clean at all times during the service procedure.

Electrical Considerations

•The work place for the blender must have properly grounded AC outlets that adhere to all local electrical codes that are applicable at the time of the repair.

•The blender power cord should always be inspected first before testing the blender operation. Do not run the blender if the power cord is damaged. Replace a damaged power cord.

•All disassembly and assembly procedures discussed in this manual should be conducted with the unit disconnected from power.

•Do not leave the blender unattended while running for extended periods. Always unplug the blender immediately after conducting your tests.

Technician

•The service technician should wear protective eyeware at all times when conducting a repair on the KitchenAid blender.

•Loose fitting sweaters, shirt sleeves or bracelets should not be worn while servicing the KitchenAid blender.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Britain Series Midline BlenderAustralian Series European SeriesTechnician Service EnvironmentElectrical Considerations Blender Repair Manual Before First Use Product FeaturesPreparing the Blender for Use Blender Assembly Continuous Operation Preliminary Inspection of BlenderOperating the KitchenAid Blender Pulse OperationPower Cord Replacement Fig Blender Service ProceduresPower Base Access Fig Coupler Replacement Fig Electronic Speed Control Board Replacement FigMotor Replacement Fig EMI Filter Replacement FigFinal Inspection Model and Serial NumbersHall Effect Sensor Fig Parts List Unit Parts For Variations of Model 5KSB555AAttachment Parts For Variations of Model 5KSB555A Item No DescriptionUnit Parts For Variations of Model 5KSB555B Attachment Parts For Variations of Model 5KSB555B Unit Parts For Variations of Model 5KSB555E Attachment Parts For Variations of Model 5KSB555E Unit Parts For Variations of Model 5KSB555S Attachment Parts For Variations of Model 5KSB555S For the WAY IT’S MADE. TM
Top Page Image Contents