ElectricalRequirements- U.S.A. Only

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path and wire gauge are in accordance with local codes and that the ground path is adequate.

Do not use an extension cord.

Make sure that the electrical connection and wire size are adequate and in conformance with the National Electrical Code, ANSI/NFPA 70-latest edition and all local codes and ordinances.

A copy of the above code standards can be obtained from:

National Fire Protection Association,

One Batterymarch Park,

Quincy, MA 02269

Electrical Connection

To properly install your range, you must determine the type of electrical connection you will be using and follow the instructions provided for it here.

■Do not ground to a gas pipe.

■Check with a qualified electrical installer if you are not sure the range is properly grounded.

■Do not have a fuse in the neutral or ground circuit.

■Range must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating plate. (The model/serial number rating plate is located on the right vertical surface of the oven door frame.)

■Range must be connected to a grounded metal, permanent wiring system.

■A 4-wire or 3-wire, single phase, 120/240 volt, 60 Hz., AC only electrical supply is required on a separate, 30-amp circuit, fused on both sides of the line.

■A time-delay fuse or circuit breaker is recommended. The fuse size must not exceed the circuit rating of the range specified on the model/serial rating plate located on the right vertical surface of the oven door frame.

■The range can be connected directly to the fused disconnect (or circuit breaker box) through flexible, or nonmetallic sheathed, copper or aluminum cable. The flexible cable extending from the fuse box or circuit breaker box should be connected directly to the junction box. See “Make Electrical Connection.”

■Locate the junction box to allow as much slack as possible between the junction box and the range so that the range can be moved if servicing is ever necessary. Do not cut the conduit.

■A UL listed conduit connector must be provided at each end of the power supply cable (at the range and at the junction box).

■Wire sizes and connections must conform with the rating of the range (30 amps).

■If the house has aluminum wiring, follow the procedure below:

a)Connect the aluminum wiring to the copper wiring using special connectors designed and UL listed for joining copper to aluminum. Follow the electrical connector manufacturer’s recommended procedure.

b)Aluminum/copper connection must conform with local codes and industry-accepted wiring practices.

Electrical Requirements -Canada Only

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path and wire gauge are in accordance with local codes.

Be sure that the electrical connection and wire size are adequate and in conformance with the CSA Standard C22.1, Canadian Electrical Code, Part 1 - latest edition, and all local codes and ordinances.

A copy of the above code standards can be obtained from:

Canadian Standards Association

178 Rexdale Blvd.

Toronto, ON M9W 1R3 CANADA.

■Do not ground to a gas pipe.

■Check with a qualified electrical installer if you are not sure the range is properly grounded.

■Do not have a fuse in the neutral or ground circuit.

■When a 4-wire, single phase 208/240 volt, 60 Hz., AC only electrical supply is available, a 30-amp minimum circuit protection is required, fused on both sides of the line.

9759121A specifications

The KitchenAid 9759121A is a highly versatile stand mixer attachment that enhances the functionality of your KitchenAid stand mixer, making it an essential tool for home chefs and baking enthusiasts alike. This attachment is specifically designed to expand the capabilities of your mixer, allowing for an array of culinary creations.

One of the standout features of the KitchenAid 9759121A is its ability to produce fresh pasta conveniently at home. This attachment typically includes different pasta-making components that allow users to create a variety of pasta shapes, including fettuccine, pappardelle, and spaghetti. The design ensures that the pasta dough is uniformly rolled and cut, resulting in a consistent texture and thickness that is crucial for achieving perfect pasta dishes.

The attachment is constructed with durable materials that ensure longevity and performance. It is compatible with a wide range of KitchenAid stand mixer models, making it a versatile addition to any kitchen. Its intuitive design means it can be easily attached and detached from the mixer, allowing for seamless integration into your cooking process.

In addition to pasta making, the KitchenAid 9759121A may include various accessories that can enhance its utility, such as different cutters and rollers, giving users even more options for their culinary creations. The ease of cleaning is another key feature; many components are dishwasher safe, which simplifies the cleanup process after a baking session.

Moreover, the attachment often emphasizes precision and consistency, which is essential when you are trying to replicate your favorite recipes. The ability to control the thickness of the pasta allows for customization to suit personal preferences and dietary needs, whether you're making lasagna sheets or delicate ravioli.

The KitchenAid 9759121A stands out not just for its functionality, but also for its ability to inspire creativity in the kitchen. Its combination of design, ease of use, and durability makes it a valuable addition to any home chef's toolkit. With this attachment, the possibilities for homemade pasta and other culinary delights are virtually endless. Whether you’re an experienced cook or a beginner, the KitchenAid 9759121A can elevate your cooking experience and enhance the quality of your meals.