GasSupply Requirements, Gas Supply Line

GasSupply Requirements

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Gas Supply Line

■Provide a gas supply line of ¾" (1.9 cm) rigid pipe to the range location. A smaller size pipe on longer runs may result in insufficient gas supply. Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape. With LP gas, piping or tubing size can be ½" (1.3 cm) minimum. Usually, LP gas suppliers determine the size and materials used in the system.

Flexible metal appliance connector:

■If local codes permit, a new CSA design-certified, 4 - 5 ft (122 - 152.4 cm) long, ⁵⁄₈" (1.6 cm) or

¾" (1.9 cm) I.D., flexible metal appliance connector may be used for connecting range to the gas supply line.

■A ½" (1.3 cm) male pipe thread is needed for connection to the female pipe threads of the inlet to the appliance pressure regulator.

■Do not kink or damage the flexible metal tubing when moving the range.

Rigid pipe connection:

Observe all governing codes and ordinances.

IMPORTANT: This installation must conform with all local codes and ordinances. In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223.1 - latest edition or CAN/CGA B149 - latest edition.

IMPORTANT: Range cooktop must be connected to a regulated gas supply.

Type of Gas

Natural Gas:

This range is design-certified by CSA International for use with Natural gas or, after proper conversion, for use with LP gas.

■This range is factory set for use with Natural gas. The model/ serial rating plate located on the right vertical surface of the oven door frame has information on the types of gas that can be used. If the types of gas listed do not include the type of gas available, check with the local gas supplier.

LP Gas conversion:

Conversion must be done by a qualified service technician.

No attempt shall be made to convert the appliance from the gas specified on the model/serial rating plate for use with a different gas without consulting the serving gas supplier. To convert to LP gas, use the LP gas conversion kit provided with your range. The parts for this kit are in the literature package supplied with the range.

The rigid pipe connection requires a combination of pipe fittings to obtain an in-line connection to the range. The rigid pipe must be level with the range connection. All strains must be removed from the supply and fuel lines so range will be level and in line.

■Must include a manual shutoff valve:

The supply line must be equipped with a manual shutoff valve. This valve should be located in the same room but external to the range. It should be in a location that allows ease of opening and closing. Do not block access to shutoff valve. The valve is for turning on or shutting off gas to the range.

A. Gas supply line

B. Shutoff valve “open” position

C. To range

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

9759121A specifications

The KitchenAid 9759121A is a highly versatile stand mixer attachment that enhances the functionality of your KitchenAid stand mixer, making it an essential tool for home chefs and baking enthusiasts alike. This attachment is specifically designed to expand the capabilities of your mixer, allowing for an array of culinary creations.

One of the standout features of the KitchenAid 9759121A is its ability to produce fresh pasta conveniently at home. This attachment typically includes different pasta-making components that allow users to create a variety of pasta shapes, including fettuccine, pappardelle, and spaghetti. The design ensures that the pasta dough is uniformly rolled and cut, resulting in a consistent texture and thickness that is crucial for achieving perfect pasta dishes.

The attachment is constructed with durable materials that ensure longevity and performance. It is compatible with a wide range of KitchenAid stand mixer models, making it a versatile addition to any kitchen. Its intuitive design means it can be easily attached and detached from the mixer, allowing for seamless integration into your cooking process.

In addition to pasta making, the KitchenAid 9759121A may include various accessories that can enhance its utility, such as different cutters and rollers, giving users even more options for their culinary creations. The ease of cleaning is another key feature; many components are dishwasher safe, which simplifies the cleanup process after a baking session.

Moreover, the attachment often emphasizes precision and consistency, which is essential when you are trying to replicate your favorite recipes. The ability to control the thickness of the pasta allows for customization to suit personal preferences and dietary needs, whether you're making lasagna sheets or delicate ravioli.

The KitchenAid 9759121A stands out not just for its functionality, but also for its ability to inspire creativity in the kitchen. Its combination of design, ease of use, and durability makes it a valuable addition to any home chef's toolkit. With this attachment, the possibilities for homemade pasta and other culinary delights are virtually endless. Whether you’re an experienced cook or a beginner, the KitchenAid 9759121A can elevate your cooking experience and enhance the quality of your meals.