Product Dimensions
Installation Clearances
H
G
F
E*
A
B
C
D
Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height.
IMPORTANT: If installing a range hood above the range, follow the range hood instructions for dimensional clearances above the cooktop surface.
O
M**
N
L
K
A
J
I
B
H
A. Backguard (required for some installations) B. 45" (114.3 cm) overall height
C. 36" (91.4 cm) cooktop height with feet loosened ¾ turn
D. 30" (76.2 cm) width
E. 26½" (67.3 cm) width with control panel* F. ¼" (0.64 cm) spacer
G. 9¼" (23.5 cm) backguard height H. 30" (76.2 cm) cooktop width
D E
C*
G
F
*When installed in a 24" (61.0 cm) base cabinet with 25"
(63.5 cm) countertop; front of oven door protrudes 1⁷⁄₈" (4.8 cm) beyond 24" (61.0 cm) base cabinet.
A. 18" (45.7 cm) upper cabinet to countertop B. 22" (55.9 cm)
C. Junction box to be located in this shaded area, see NOTE* D. 4" (10.2 cm)
E. 20" (50.8 cm) F. 12" (30.5 cm) G. 5½" (14.0 cm)
H. Gas line opening to be located in this shaded area I. 3½" (8.9 cm)
J. 8" (20.3 cm) K. 30¼" (76.8 cm)
L. 4" (10.2 cm) min. clearance from both sides of range to side wall or other combustible material
M. For minimum clearance to top of range, see NOTE**. N. 30" (76.2 cm) min. upper cabinet width
O. 13" (33.0 cm) max. upper cabinet depth
*NOTE: Receptacle must be rotated 90° for Canadian installation.
**NOTE: 36" (91.4 cm) minimum when bottom of wood or metal cabinet is covered by not less than ¹⁄₄" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
42" (106.7 cm) minimum clearance between the top of the cooking platform and the bottom of an uncovered wood or metal cabinet.
5