CompleteInstallation, Adjust Flame Height

CompleteInstallation

Electronic Ignition System

Initial Lighting and Gas Flame Adjustments

Surface burners use electronic igniters in place of standing pilots. When the cooktop control knob is turned to the LITE position, the system creates a spark to light the burner. This sparking continues, as long as the control knob is turned to LITE.

The grill and griddle burner use an igniter glow bar that is either on or off in place of standing pilots. When the glow bar is hot, it sends a signal back to the safety valve which opens allowing gas to flow to the grill and griddle burner.

Adjust Flame Height

NOTE: There is no adjustment for the griddle flame. Gas flow is at 100%, temperature is controlled by a thermostat.

The surface burner or grill “low” flame should be a steady blue flame approximately ¼" (0.64 cm) high.

Check Operation of Surface Burners, Grill and Griddle

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Push in and turn the surface burners and grill control knobs to the LITE position. For griddles, turn the griddle control knob to a temperature degree mark (300° recommended).

The surface burner flame should light within 4 seconds. The first time a surface burner is lit it may take longer than

10 seconds to light because of air in the gas line.

3.Check the flame on HI for a blue color. It should be clean and soft in character. No yellow tip, blowing or lifting of flame should occur. Occasional orange flashes are normal and reflect different elements in the air or gas.

The grill and griddle flame should light in 30 to 40 seconds. The griddle flame cannot be seen, but you should hear it ignite and feel heat from the griddle.

4.After verifying the proper burner operation, turn the control knobs to OFF.

If burners do not light properly:

■Turn surface burner control knob to the OFF position.

■Check that the power supply cord is plugged in and the circuit breaker has not tripped or the fuse blown.

■Check that the gas shutoff valves are set to the “open” position.

■Check that burner caps are properly positioned on burner bases.

Recheck operation of surface burners, grill and griddle. If a burner does not light at this point, contact your dealer or authorized service company for assistance.

A.Low flame

B.High flame

If the “low” flame needs to be adjusted:

The flame can be adjusted using the adjustment screw in the center of the valve stem. The valve stem is located directly underneath the control knob.

A. Adjustment screw

1.Remove the control knob.

2.Hold the knob stem with a pair of pliers. Use a small flat- blade screwdriver to turn the screw located in the center of the control knob stem until the flame is the proper size.

3.Replace the control knob.

4.Test the flame by turning the control from LO to HI, checking the flame at each setting.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use and Care Guide or contact the dealer from whom you purchased your cooktop.

9759405C specifications

The KitchenAid 9759405C is a versatile kitchen appliance that stands out for its robust features and innovative technologies, designed to enhance the culinary experience for home cooks and professional chefs alike. This appliance is part of a trusted brand known for quality and durability in kitchen products.

One of the main features of the 9759405C is its powerful motor, which provides consistent performance for various mixing tasks. Whether you are kneading dough for bread, whipping cream, or mixing batter for cakes, the strength of this motor can handle dense mixtures with ease. The appliance offers multiple speed settings, allowing users to select the ideal speed for their specific recipe. The versatility of speed options also ensures precision, whether you need a gentle fold or a vigorous mix.

Another standout characteristic of the KitchenAid 9759405C is its innovative planetary mixing action. This technology ensures that the mixing attachment moves in one direction while the bowl rotates in the opposite direction. This design allows for thorough mixing, which means ingredients are evenly combined without leaving unmixed pockets. It significantly reduces the time required to achieve optimal consistency in mixtures.

Durability is a hallmark of the 9759405C, as it is built with high-quality materials designed to withstand frequent use. The robust design and sturdy construction ensure that this mixer can endure the rigors of daily cooking. Additionally, it comes equipped with a variety of attachments, including a flat beater, dough hook, and wire whip, providing users with everything they need to tackle a wide range of cooking tasks.

The appliance's user-friendly interface and ease of operation make it accessible to cooks of all skill levels. The tilt-head design allows for easy access to the mixing bowl and makes it simple to add ingredients during operation.

Furthermore, the KitchenAid 9759405C’s sleek, modern design fits well into various kitchen aesthetics, making it not only a functional tool but also an attractive addition to your kitchen countertop. Its thoughtful features, coupled with advanced technology, make the 9759405C an essential appliance for anyone looking to elevate their cooking game. Whether you are a beginner or a seasoned chef, this mixer can simplify your culinary tasks and help you create delicious dishes with ease.