KitchenAid 3186523 installation instructions 13.1

Page 21

To avoid scratching countertop, lift entire cooktop up from cutout when repositioning cooktop into countertop opening.

13.1

I I

Insert the cooktop into the countertop opening. Check that the front of the cooktop is parallel to the front edge of the countertop. Check that all required clearances are met. Use a pencil to mark a line along the rear of the cooktop on the countertop.

4 Remove the

l cooktop from the

0 cutout and place it upside down on a protected surface.

Remove the paper backing from a small section of the

foam sealing strip. Place the strip l/8” from cooktop edge on the underside of the glass. Continue until foam strip completely outlines the edge of the cooktop.

If you are installing more than one appliance in the same cutout, you do not need to place a foam strip on the side that will be adjacent to another appliance.

Do Not use additional sealant around outer edge of cooktop(

151

 

 

Attach mounting

.

brackets to each

 

side

of the

burner

box with the 5/l 6” screws.

Do Not tiahten

the

a

screws.

furn

the

mounting

brackets

so

each is under the burner box.

If you are installing additional appliances in the same cutout, attach one mounting bracket to the right side of each additional appliance.

Insert the cooktop into the cutout and align it with the pencil line. Check that

cooktop is parallel to the front edge of the countertop. Lift the entire cooktop to make adjustments so the foam sealing strip can seal properly.

If you are installing only one appliance in cutout, go to Step 8.

If you are installing additional gas cooktops

in the same cutout, complete Steps 1, 2, 4, 5, 6 and 7 for each additional appliance.

If you are installing an electric cooktop or grill or a downdraft vent as an additional appliance, read and follow specific installation instructions for those products.

support brace

screws

L1-l. Attach support brace to side of the cooktop that will be adjacent to another

appliance. Insert additional cooktop into the cutout and align with the pencil line used for first cooktop. Check that cooktop is parallel to the front edge of the countertop. Lift the entire cooktop to make adjustments so the foam sealing strip can seal properly.

Repeat for additional cooktops or grills.

Do Not over-tighten screws.

glass cooktop

 

 

\ \

 

countertop

I

I

//

I I

1

5/16” clamping bracket screw

One cooktop in cutout: Rotate the mounting brackets away from the burner

box. Do Not overtighten screws: Tighten the mounting brackets to the burner box. Insert the 2-l/2” clamping screws into the mounting brackets. Use a screwdriver to tighten the screws against the underside of the countertop. Remove the pencil outline from countertop.

21

Image 21
Contents Read and save these instructions Create-a-CooktopCabinet depth Before vou start Single Installations Product/cutoutOne product Combinations Parts supplied for installatron Tools and materials needed for installationTools/Parts Electric CooktopUngrounded neutral Grounded neutralElectric Cooktop and Grill Now startWith cooktop and/or grill in kitchen Correspond to steps Downdraft Vent Downdraft Vent Must be Connected with Copper WireRecommended duct length for interior mounted blower Interior mounted vent motor installation methodsDuct system Island location Interior wall locationRecommended duct length for exterior mounted blower Exterior Mounted vent MotorLocation Blower Downdraft Vent cont.1 Numbers correspond to steps 15.1 Hack Numbers correspond to steps 117Gas conversion Sealed Gas CooktopRecommended ground method Electrical requirements13.1 Numbers correspond to steps 115.1 Wiring diagram

3186523 specifications

The KitchenAid 3186523 is a versatile and highly functional kitchen accessory designed to elevate your culinary experience. This product is part of KitchenAid's esteemed lineup of kitchen tools, known for their reliability, innovative features, and timeless design. The 3186523 model showcases some of the best attributes that have made KitchenAid a household name.

One of the standout features of the KitchenAid 3186523 is its robust construction, which combines durability with aesthetic appeal. Made from high-quality materials, this kitchen accessory is designed to withstand the rigors of daily use while maintaining its sleek appearance. The heavyweight build provides stability, ensuring that it performs consistently regardless of the task at hand.

In terms of technology, the KitchenAid 3186523 employs innovative design principles that make food preparation easier and more efficient. This model typically includes features such as ergonomic handles, allowing for a comfortable grip during use. The thoughtfully designed shape of the accessory enhances maneuverability, making it suitable for various tasks, whether cutting, mixing, or serving.

The versatility of the KitchenAid 3186523 extends to its compatibility with a wide range of KitchenAid products. This accessory is designed to complement other appliances and tools in the KitchenAid line, such as stand mixers and food processors, enhancing their functionality and making it easier to create a variety of dishes.

Cleaning and maintenance are also made simple with this model. Most KitchenAid accessories, including the 3186523, are dishwasher safe, reducing the hassle of cleanup. Additionally, the materials used are often resistant to stains and odors, ensuring that your accessories will remain looking new even after extensive use.

One of the defining characteristics of KitchenAid products, including the 3186523, is their iconic style. Available in a variety of colors, this accessory can seamlessly blend with any kitchen décor, adding a touch of elegance to your culinary space.

In conclusion, the KitchenAid 3186523 delivers an impressive combination of durability, functionality, and style. Whether you're a seasoned chef or a casual cook, this kitchen accessory serves as an invaluable tool that caters to a wide array of cooking and baking needs, making it a worthy addition to any kitchen.