KitchenAid 3186523 installation instructions Before vou start

Page 3

Before vou start...

Proper installation iz your responsibility. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with the installation clearances specified on the model/serial rating plate. The model/serial rating plate is located on the bottom of cooktops and grills and on the right side, above the wiring box on the downdraft vent blower box.

Check location where cooktops, grills and downdraft vents will be installed. The location should be away from strong draft areas, such as windows, doors and strong heating vents or fans. All should be located for convenient use in the kitchen.

Do Not obstruct the flow of combustion and ventilation air.

ALL OPENINGS IN THE WALL OR FLOOR WHERE COOKTOPS, GRILLS AND DOWNDRAFT VENTS ARE TO BE INSTALLED MUST BE SEALED.

Grounded electrical outlet is required. See “Electrical requirements,” Page 6.

When installing a downdraft vent, the cabinet drawer(s) will need to be removed and the drawer front(s) installed permanently to cabinet.

Proper gas supply connection must be available. See “Gassupply requirements,” Page 19.

30” min. base cabinet is required. If cabinet has a drawer, a 3-l/2” depth clearance from the countertop to the top of the drawer (or other obstruction) in base cabinet is required.

Product dimensions

All cooktops are same size. The distance to the front edge of the countertop, distance to a side wall or other combustible surface, location of electric supply and height to cabinets above cooktop varies depending whether the cooktop is gas or electric.

Cabinet construction: This appliance is designed for use in a base cabinet with a depth of 24”. The maximum depth for the overhead cabinets is 13”. The minimum vertical clearance between the cooking surface and the overhead depends on the type of overhead cabinets you have. (See Note, Page 2.) Overhead cabinets installed at either side of the appliance must be a minimum of 18” above the cooking surface. The minimum distance between the front edge of the countertop and the front edge of the cooktop is 3/4”. The minimum horizontal distance between overhead cabinets above appliances is the same as the width of the installed appliances.

When installing a cooktop under existing cabinets and the installation does not meet the minimum cabinet clearances, install a range hood above the cooktop.

Important: Observe all governing codes and ordinances.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, observe the following:

Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Ducted fans must always be vented to the outdoors.

WARNING: To reduce the risk of fire, use only metal ductwork.

It is the customer’s responsibility:

To contact a qualified electrical installer. To assure that electrical installation is adequate and in conformance with National Electrical Code, ANSYNFPA 70 - latest edition*, and all local codes and ordinances.

Copies of the standards listed above may be obtained from:

*National Fire Protection Association Batterymarch Park

Quincy, Massachusetts 02269

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Read and save these instructions Create-a-CooktopCabinet depth Before vou start Single Installations Product/cutoutOne product Combinations Electric Cooktop Tools and materials needed for installationParts supplied for installatron Tools/PartsUngrounded neutral Grounded neutralElectric Cooktop and Grill Now startWith cooktop and/or grill in kitchen Correspond to steps Downdraft Vent Downdraft Vent Must be Connected with Copper WireIsland location Interior wall location Interior mounted vent motor installation methodsRecommended duct length for interior mounted blower Duct systemRecommended duct length for exterior mounted blower Exterior Mounted vent MotorLocation Blower Downdraft Vent cont.1 Numbers correspond to steps 15.1 Hack Numbers correspond to steps 117Gas conversion Sealed Gas CooktopRecommended ground method Electrical requirements13.1 Numbers correspond to steps 115.1 Wiring diagram

3186523 specifications

The KitchenAid 3186523 is a versatile and highly functional kitchen accessory designed to elevate your culinary experience. This product is part of KitchenAid's esteemed lineup of kitchen tools, known for their reliability, innovative features, and timeless design. The 3186523 model showcases some of the best attributes that have made KitchenAid a household name.

One of the standout features of the KitchenAid 3186523 is its robust construction, which combines durability with aesthetic appeal. Made from high-quality materials, this kitchen accessory is designed to withstand the rigors of daily use while maintaining its sleek appearance. The heavyweight build provides stability, ensuring that it performs consistently regardless of the task at hand.

In terms of technology, the KitchenAid 3186523 employs innovative design principles that make food preparation easier and more efficient. This model typically includes features such as ergonomic handles, allowing for a comfortable grip during use. The thoughtfully designed shape of the accessory enhances maneuverability, making it suitable for various tasks, whether cutting, mixing, or serving.

The versatility of the KitchenAid 3186523 extends to its compatibility with a wide range of KitchenAid products. This accessory is designed to complement other appliances and tools in the KitchenAid line, such as stand mixers and food processors, enhancing their functionality and making it easier to create a variety of dishes.

Cleaning and maintenance are also made simple with this model. Most KitchenAid accessories, including the 3186523, are dishwasher safe, reducing the hassle of cleanup. Additionally, the materials used are often resistant to stains and odors, ensuring that your accessories will remain looking new even after extensive use.

One of the defining characteristics of KitchenAid products, including the 3186523, is their iconic style. Available in a variety of colors, this accessory can seamlessly blend with any kitchen décor, adding a touch of elegance to your culinary space.

In conclusion, the KitchenAid 3186523 delivers an impressive combination of durability, functionality, and style. Whether you're a seasoned chef or a casual cook, this kitchen accessory serves as an invaluable tool that caters to a wide array of cooking and baking needs, making it a worthy addition to any kitchen.
Top Page Image Contents