Preparing the Food Processor for Use
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
Before First Use
Before using your Food Processor for the first time, wash the work bowl, work bowl cover, feed tube pusher, and blades either by hand or in the dishwasher (see “Cleaning the Food Processor” on page 11).
Work Bowl Assembly
1.Place the Food Processor base on a dry, level countertop with the controls facing forward. Do not plug in the Food Processor until it is completely assembled.
2.With the handle just to the left of center, place the work bowl on the base, fitting the center opening over the power shaft.
3.Grasp the work bowl handle and turn the bowl to the right until it locks into position.
4.Insert the mulitpurpose blade or dough blade into the work bowl. Place the blade on the power shaft. Rotate the blade so it falls into place on the shaft.
5.Place the work bowl cover on the work bowl with the feed tube just to the left of the work bowl handle. Grasp the feed tube and turn the cover to the right until it locks into place.
NOTE: To avoid damage to the work bowl, do not attach the cover to the work bowl before the work bowl is locked on the base.
6.Fit the 2-piece food pusher into the feed tube.
O
Pulse