Henny Penny 600, 500 manual Warnings And, ERROR MESSAGES Continued, Error Codes, Cause, Correction

			Model 500/600
	3-5. WARNINGS AND
	ERROR MESSAGES (Continued)
		ERROR CODES
	DISPLAY	CAUSE	CORRECTION
	“E-5”	Controls sensing 405°F	Have heat components and temperature probe
	“FRYER TOO	or above	checked
	HOT”
	“E-6” (A or B)	Faulty temperature probe or	Have temperature probe and connection
“FRYER TEMP		connection	checked
	SENSOR
	FAILED”
	“E-10”	Peanut oil temperature too hot,	Reset high limit per Operating Components;
	“HIGH LIMIT	drain valve opened while heat was	Section; check peanut oil temperature for
	TRIPPED”	on, or faulty high limit	overheating; have heat components checked if
			high limit continues to trip
	“E-15”	Drain is open or faulty microswitch	Close drain; have drain microswitch checked
	“DRAIN IS		if error code persists
	OPEN”
	“E-25”	Wrong or faulty elements or wiring	Have electrical supply, wiring, and elements
	“HEAT AMPS	problem.	checked
	WERE TOO
	HIGH”
	(500 fryer only)		Because of the seriousness of this error code,
			turn the COOK/PUMP switch OFF and back
			to COOK to cancel.
	“E-26”	Faulty contactors or PC board	Have the contactors and PC board checked
	“HEAT AMPS
	ARE
	LOCKED ON”
	(500 fryer only)		This error code could be displayed even with
			the COOK/PUMP switch turned OFF. Unplug
			fryer or shut off the wall circuit breaker to
			disconnect electrical power to fryer.
	“E-41”	Memory scrambled; an individual	Turn the COOK/PUMP switch OFF and back
	“SYSTEM	product program may be scrambled;	to COOK; if error code persists, have the PC
	DATA LOST”	ex: “E-41 -2- DATA LOST”; this	board checked or re-initialized
		means product #2 program is
		scrambled
	“E-41”	Memory scrambled; an individual	Turn the COOK/PUMP switch OFF and back
	“SYSTEM	product program may be scrambled;	to COOK; if error code persists, have the PC
	DATA LOST”	ex: “E-41 -2- DATA LOST”; this	board checked or re-initialized
		means product #2 program is
3-12		scrambled	205