Henny Penny 600 Diagnostic Mode, “10 ALL HC ITEMS”, “10 3 HC ITEMS”, Information Mode, “10 MATCH”

				Model 500/600
5-3.	DIAGNOSTIC MODE	The final item in D 10 identifies if any changes have been made to the
	DETAILS (Continued)	heat control settings. These settings affect the fryer’s heating algorithms,
		and include the PC factors, rate-of-rise compensations, and heat pulse
		cycle time, etc.
		“10: ALL HC ITEMS”		“10: 3 HC ITEMS”
		“10: MATCH”		“10: DO NOT MATCH”
		“10: ORIG. VALUES”		“10: ORIG. VALUES”
5-4.	INFORMATION MODE	This historic information in this mode can be recorded and used for
	DETAILS	operational and technical help.
		Press	and	at the same time and “*INFO MODE*”

shows in the display, followed by “1. E-LOG”.

Press and hold to exit Information Mode at any time, or after 2 minutes, controls automatically exit back to normal operation.

1.E-LOG(error code log)

Press and “1A. (date & time) *NOW* shows in display. This is the present date and time.

Press and if a error was recorded, “1B. (date, time, and error

code infromation)” shows in display. This is the latest error code that the controls recorded.

Press and the next latest error code information can be seen. Up to 10 error codes (1B to 1K) can be stored in the E-LOG section.

Press to continue to P-LOG.

2.P-LOG(power-up log)

Press and “2A. (date & time) *NOW* shows in display. This is the present date and time.

Press and the latest power-up is shown, “2B. (date, time,) PWR-UP”.

5-26 303