Henny Penny 600, 500 manual Cleaning The, FRYPOT Continued, fryer, New Or Used, Function

	Model 500/600
3-13. CLEANING THE	13. Replace the clean filter assembly in the drain pan and install under
FRYPOT (Continued)	fryer.

14.Refill the fryer with fresh peanut oil.

After completing a Clean-Out Mode, the controls assume fresh peanut oil is now in the frypot and adjust the temperature accordingly. If the Clean-Out Mode was aborted before starting the 15 minute cycle or if fresh peanut oil is not in the frypot, manually set the controls to NEW or USED peanut oil per the Manually Setting New or Used Peanut Oil Function Section.

3-14. MANUALLY SETTING 1. Turn the COOK/PUMP switch to OFF.

NEW OR USED

PEANUT OIL2. Press and hold while turning the COOK/PUMP switch to

FUNCTION

COOK, until “IS OIL NEW OR USED?” shows in the display.

3.	Press		for new peanut oil, or		for used peanut oil.
4.	If	was pressed, “OIL IS NEW?” shows in the display.
	Press		for YES, and “THANK YOU” shows in the display,
	and controls resume normal operation.
5.	If	was pressed, “OIL IS USED?” shows in the display.
6.	Press		for YES, and “HOW OLD IS OIL?” shows in display.
7.	Press			to set the age of the peanut oil.

8.Press . “THANK YOU” shows in the display and controls resume normal operation.

3-28 303