BATTERY INSTALLATION
1.Open the battery compartment by sliding the cover toward the bottom of the Headphone.
2.Place two (2) alkaline AAA batteries into the battery compartment of the Headphones, making sure that the battery polarity is correct.
3.Snap the battery cover back into place.
Figure 3. The Remote Headphone Battery Installation.
OWNER’S MANUAL/INSTALLATION GUIDE
OPERATION DESCRIPTION
PLEASE READ CAREFULLY TO PREVENT DAMAGE TO THE HEADPHONES OR YOUR EARS.
1.Be sure batteries are properly installed in the Headphones.
2.Turn the Headphone volume nearly off before turing on the power switch.
3.Turn the Headphone power switch to the ON position.
4.Place the headphones on your head and the power indica- tor will illuminate.
5.Adjust the Headphone volume to a comfortable listening level.
Channel A/B Selection Switch
1.Select the appropriate channel (A/B) for the desired audio source signal.
NOTE: Remove headphones and lower volume before switch- ing between channels. The signal on one channel may be louder than the other, resulting in possible hearing damage.
5