English
5. iPod CONNECTION
Start-up
After connecting your iPod to the EA1276, the iPod display will change to the following:
To start iPod operations, change the main unit mode to iPod mode. Playback will start automatically from the last position of iPod.
The display changes from:
CONNECT g Start Playing
It will display current track and total tracks available in the current category.
If the iPod is not connected, the main unit will display “No iPod”.
The main unit is unable to detect the presence of iPod if the battery of the iPod is fl at.
Disconnecting
iPod automatically switches “on” after connecting to EA1276, and it’s battery is charged as long as it stays connected with the vehicle ignition key turned to ACC or ON.
To switch off iPod manually, disconnect from EA1276 adaptor.
If vehicle ignition is turned to ACC off, playback is paused, and iPod will go to power off within a few minutes.
6. MAIN FEATURES
Playback
iPod buttons are disabled and the display is locked after it is connected to EA1276. All operations of the iPod are controlled from the main unit. Some iPod operations and features will be unavailable. Please read this manual to understand your supported iPod features.
For playback operations, please refer to the main unit operations.
Default playback setting
By default, the playback setting will be:
•Start to play from the last position of track before iPod is being connected.
•Shuffl e ( Random) On/Off will follow iPod setting
•All Repeat On
When the iPod is connected, the main unit will display current track number and total tracks in current category by default.
Playback position and setting
Playback position and setting will remain the same as long as the iPod stays connected to EA1276.
If the iPod is disconnected, playback position will remain the same position before disconnect.
6