Error Displays, Playlist, Smart playlist

English

Playlist

EA1276 simulates the main unit as iPod. Therefore, it can support all the playlists in iPod.

Note:

Please refer Acceptable playlist for more information.

How to create playlist

A playlist must be created in iPod prior to connection to the main unit. The main unit cannot be used to create a playlist. Please consult iPod Users Manual for playlist creation.

Changing playlist

Playback will start from the ﬁ rst song of the selected playlist when next/previous playlist function is performed.

Smart playlist

EA1276 might not play updated songs of “Smart Playlist” properly after connection. It only plays the list set during connection.

Acceptable playlist

EA1276 can support all playlists that previously loaded into iPod before connection. However, “On-the-go” playlist which is created by the iPod itself will not be supported.

When iPod is connected to EA1276 and main unit, main unit will search for available playlist.

7. USABLE iPod MODELS

iPod 4th Generation (Software Version 3.1 or higher) iPod mini (Software Version 1.4 or higher)

iPod photo (Software Version 1.2 or higher, it does not apply to picture display) iPod nano (Software Version 1.0 or higher, it does not apply to picture display) iPod video

8.CHANGING MODE FROM iPod TO OTHER

If the main unit source button is continuously pressed, the main unit will change from iPod mode to other mode (depending on connections and system installed). iPod playback is temporarily paused.

iPod setting and play position is kept as long as iPod is still connected during this period.

9. ERROR DISPLAYS

Error Display	Reason	Corrective Measure
ERROR 1	Communication error.	Change mode of main unit to others and change back
ERROR 1		to iPod or disconnect/reconnect iPod.