Hotpoint HTN40 manual Installing your Cooker Hood, Installation for Recirculation

Page 5

Installing your Cooker Hood

Your new Cooker Hood can be installed either for recirculation or extraction through an outside wall. (All fitting supplied)

Installation for Recirculation:

If it is not possible to exhaust to the outside, the hood can be used to filter and recirculate the air (Fig.1).

Fig.1

Your hood can be fitted with a carbon filter (optional extra) to remove odours (for fitting, see page 11).

The carbon (charcoal) filter can then be fitted.

NOTE: The hood is more efficient in the exhaust mode, therefore this position should be selected during the warmer months of the year when no heating is being used. When the room is being heated, if the recirculation position is selected heat will not be wasted.

To obtain the best performance it is advisable to switch on the hood a few minutes before you start cooking and leave it running approximately 15 minutes after finishing.

Installation for Extraction:

This method is recommended if at all possible. Fumes and grease laden air are drawn into the underside of the hood and expelled outside the kitchen. The air can be expelled either upwards through a ventilating shaft (Fig.2) or directly through a wall to the outside (Fig.3). Ducting will be required if the Cooker Hood is mounted away from the outside vent.

Fig.2Fig.3

IMPORTANT: The exhaust air must not be expelled through a smoke or waste-gas chimney which is in use or through a shaft used for ventilating rooms or into the cavity of a cavity wall.

If the room contains a flued fuel burning appliance, such as a gas or oil fired central heating boiler, which is not of the ‘Balanced Flue’ type, you should make sure that there is adequate air inlet into the room at all times so that fumes from the boiler are not drawn back into the room by the Cooker Hood.

NOTE: All installations must comply with local authorities and building regulation requirements for the discharge of exhaust air into the atmosphere.

5

Image 5
Contents Cooker Hood Electrical Requirements Your new Cooker HoodRetention of the Instruction Book ContentsUnpacking DimensionsGet to know your Cooker Hood Installation for Recirculation Installing your Cooker HoodWall Vent Kit Top or Rear ExtractionDucting Mounting Height MountingInstalling your Cooker Hood Fitting the Decor Panel Fan Speed Operating your Cooker HoodWork Top Illumination Don’tCarbon Filter Recirculation only Filters and their replacementCaring for your Cooker Hood How to replace the light CleaningTroubleshooting Page Page Key Contacts

HTN40 specifications

The Hotpoint HTN40 is a modern refrigerator known for its blend of functionality, efficiency, and style. This appliance has been designed to meet the needs of contemporary households while offering features that ensure food stays fresh for longer periods.

One of the standout features of the HTN40 is its energy efficiency. With an impressive energy rating, this refrigerator helps homeowners save on their electricity bills without compromising on performance. This commitment to energy efficiency not only benefits the consumer but also contributes to a healthier planet.

The Hotpoint HTN40 comes equipped with a spacious interior that maximizes storage capabilities. Its flexible shelving is adjustable, allowing users to customize the layout according to their storage needs. Additionally, it boasts dedicated compartments, including crisper drawers that maintain optimal humidity levels for fruits and vegetables, keeping them fresh for a longer time.

The refrigerator's anti-bacterial protection technology is another noteworthy characteristic. This innovative feature works to prevent the growth of bacteria, ensuring that the food stored inside remains hygienic and safe for consumption. This is particularly beneficial in households with children or individuals with compromised immune systems.

Furthermore, the HTN40 incorporates a modern cooling system that distributes air evenly throughout the compartment. This advanced technology prevents temperature fluctuations and maintains a consistent environment, which is crucial for preserving perishable items. The frost-free design eliminates the need for manual defrosting, making maintenance a breeze.

In terms of design, the Hotpoint HTN40 offers a sleek and stylish look that complements a wide range of kitchen aesthetics. Its clean lines and modern finishes make it a standout appliance without being overly flashy.

Another appealing aspect of this model is its quiet operation. The refrigerator operates with minimal noise, allowing it to fit seamlessly into any home setting without disturbing daily activities.

In conclusion, the Hotpoint HTN40 is a feature-rich refrigerator that combines efficiency, technology, and stylish design. With its spacious interior, energy-saving capabilities, and innovative features like anti-bacterial protection and even cooling, it caters to the needs of modern households while providing peace of mind regarding food safety and maintenance. This appliance is undoubtedly a great investment for those looking to enhance their kitchen experience.