Mounting Height | Hotpoint HTN40 specification

Installing your Cooker Hood

MOUNTING

Your Cooker Hood is designed to fit between two wall cupboards 600mm apart and to take a door panel measuring 400mm (min) to 600mm (max) in height, to match the adjacent cupboards,

Mounting Height:

The bottom of the hood should be no less than 650mm above an electric hob,

750mm above a gas hob or mixed fuel cooker, 400-450mm above a high level grill/top oven. For the best results, the hood should be mounted as near as possible to the minimum recommended height.

WARNING: The fan motor of this appliance incorporates a thermal cut-out device which will operate if the hood is installed below the minimum recommended heights listed above, or if the motor becomes over- heated. If the cut-out device is activated, switch off the fan motor and allow the hood to cool.

The cut-out device will reset itself when the fan motor has cooled significantly.

NOTE: This hood has been designed and approved for installation over an electric hob with a maximum input of 7kW or a gas hob with a maximum input of 10kW when fitted in accordance with the heights recommended above.

Mounting between cabinets on the Wall: The hood may be fixed to any rigid vertical surface. If the hood can only be fixed to a hollow construction plaster or partition board structure, then the wall must be sufficiently reinforced to enable the hood to be fixed securely in position.

Ensure that the cupboard is securely fixed to the wall, then proceed as follows:

Place the template provided on the wall between the cupboards and drill the holes indicated.

Fig.6

Place the wall plugs provided into the drilled holes (Fig.6).

In cases where the wall plugs provided are not suitable for the type of wall ie. plaster board or cavity, appropriate fittings should be obtained.

Fig.7

Adjust the position of the upper brackets (Fig. 7 B). Fit the hood to the hooks by means of the two brackets B. Ensure that the hood is at the right height, the height of the hood can be adjusted with the help of the screws (Fig.7 S).

The hood can be fitted to the cupboards as detailed under the heading ‘Fitting the Hood to the Cupboards’.

in the event that the side cupboards are considered to be inadequate to support the weight of the hood, the hood should be fixed to the wall as well as to the side of the cupboards.

HTN40 specifications

The Hotpoint HTN40 is a modern refrigerator known for its blend of functionality, efficiency, and style. This appliance has been designed to meet the needs of contemporary households while offering features that ensure food stays fresh for longer periods.

One of the standout features of the HTN40 is its energy efficiency. With an impressive energy rating, this refrigerator helps homeowners save on their electricity bills without compromising on performance. This commitment to energy efficiency not only benefits the consumer but also contributes to a healthier planet.

The Hotpoint HTN40 comes equipped with a spacious interior that maximizes storage capabilities. Its flexible shelving is adjustable, allowing users to customize the layout according to their storage needs. Additionally, it boasts dedicated compartments, including crisper drawers that maintain optimal humidity levels for fruits and vegetables, keeping them fresh for a longer time.

The refrigerator's anti-bacterial protection technology is another noteworthy characteristic. This innovative feature works to prevent the growth of bacteria, ensuring that the food stored inside remains hygienic and safe for consumption. This is particularly beneficial in households with children or individuals with compromised immune systems.

Furthermore, the HTN40 incorporates a modern cooling system that distributes air evenly throughout the compartment. This advanced technology prevents temperature fluctuations and maintains a consistent environment, which is crucial for preserving perishable items. The frost-free design eliminates the need for manual defrosting, making maintenance a breeze.

In terms of design, the Hotpoint HTN40 offers a sleek and stylish look that complements a wide range of kitchen aesthetics. Its clean lines and modern finishes make it a standout appliance without being overly flashy.

Another appealing aspect of this model is its quiet operation. The refrigerator operates with minimal noise, allowing it to fit seamlessly into any home setting without disturbing daily activities.

In conclusion, the Hotpoint HTN40 is a feature-rich refrigerator that combines efficiency, technology, and stylish design. With its spacious interior, energy-saving capabilities, and innovative features like anti-bacterial protection and even cooling, it caters to the needs of modern households while providing peace of mind regarding food safety and maintenance. This appliance is undoubtedly a great investment for those looking to enhance their kitchen experience.