Replacing fuse covers, Replacement fuse covers

ELECTRICAL CONNECTION

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

Fitting a new plug

IMPORTANT:

WIRES IN THE MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE...

Green and Yellow	-	Earth
Blue	-	Neutral
Brown	-	Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

-Connect Green and Yellow wire to terminal marked 'E' or or coloured Green and Yellow.

-Connect Brown wire to terminal marked 'L' or coloured red or brown.

-Connect Blue wire to terminal marked 'N' or coloured Black or Blue.

If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse. A 15amp plug must be protected by a 15amp fuse, either in the plug or adaptor or at the distribution board.

If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

CE Marking certifies that this appliance conforms to the following EEC directives :

Low Voltage Equipment - 73/23/EEC & 93/68 EEC

Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC

HUT161I specifications

The Hotpoint HUT161I is a compact and efficient under-counter refrigerator designed to meet the needs of modern households while maximizing storage space. With its sleek and stylish exterior, this appliance not only blends seamlessly into your kitchen but also adds an elegant touch.

One of the standout features of the Hotpoint HUT161I is its impressive energy efficiency. Rated with an A+ energy label, this refrigerator is designed to consume less electricity, helping you save on your utility bills while also being environmentally friendly. This energy efficiency is complemented by an advanced cooling system that ensures consistent and optimal temperature throughout the interior, preventing any temperature fluctuations that could compromise the freshness of stored food.

The refrigerator boasts a Net Capacity of 141 liters, providing ample storage space for fresh produce, dairy products, and other groceries. The shelves are adjustable, allowing users to customize the layout to fit larger items or bulky containers, enhancing the versatility of the storage space. Additionally, the Hotpoint HUT161I incorporates a dedicated salad crisper drawer, ideal for keeping fruits and vegetables fresh and crisp for longer durations.

Another significant technology featured in the Hotpoint HUT161I is its Low Noise Level operation. With a sound rating of just 40 dB, it is designed to operate quietly, making it perfect for open-plan living spaces or smaller kitchens where noise could be a concern.

The Hotpoint HUT161I also includes a user-friendly control panel, making it easy to adjust settings and monitor temperature levels. The interior lighting is provided by an energy-efficient LED bulb, illuminating the contents of the fridge without adding to the energy consumption.

In terms of design, the Hotpoint HUT161I features a reversible door, ensuring it can fit seamlessly in various kitchen layouts. The sleek white finish not only adds to its aesthetic appeal but also makes it easy to clean and maintain.

Overall, the Hotpoint HUT161I combines practicality, efficiency, and style, making it an excellent choice for anyone in need of a reliable under-counter fridge that meets contemporary demands, all while ensuring that your food remains fresh and delicious. Whether in a family kitchen, a studio apartment, or a workspace, this appliance proves to be a valuable addition, enhancing the convenience of food storage.