Siemens HF36V306 manual To reduce the risk of injury to persons, For all cord connected appliances

Page 5

SAFETY

- Do not cook anything directly on the oven floor or

HOT LIQUIDS SUDDENLY BOILING OVER WHEN THE

turntable. Use a microwavable dish.

CONTAINER IS DISTURBED OR A SPOON OR OTHER

- Keep a browning dish at least 3/16 inch above floor.

UTENSIL IS INSERTED INTO THE LIQUID.

Carefully read and follow the instructions for the

 

To reduce the risk of injury to persons:

browning dish. If you use a browning dish incorrectly,

you could damage the oven floor.

- Do not overheat the liquid.

 

• Install or locate this appliance only in accordance with

- Stir the liquid both before and halfway through

the provided installation instructions.

heating it.

 

• This appliance should be serviced only by qualified

- Use extreme care when inserting a spoon or other

service personnel. Contact the nearest authorized ser-

utensil into the container once heating has begun.

vice facility for examination, repair or adjustment.

- Do not use straight-sided containers with narrow

• Liquids such as water, coffee, or tea are able to be over-

necks.

heated beyond the boiling point without appearing to

- After heating, allow the container to stand in the

be boiling. Visible bubbling or boiling when the

microwave oven for a short time before removing the

container is removed from the microwave oven is

container.

not always present. THIS COULD RESULT IN VERY

 

SAVE THESE INSTRUCTIONS

Electrical requirements

Observe all governing codes and ordinances. A 120 Volt, 60 Hz, AC only, 15 or 20 amp fused electrical supply is required. (A time-delay fuse is recommended.) It is recommended that a separate circuit serving only this appliance be provided.

ELECTRICAL SHOCK HAZARD Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord.

Failure to follow these

instructions can result in death,

fire, or electrical shock.

GROUNDING INSTRUCTIONS

• For all cord connected appliances:

The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING: Improper use of the grounding can result in a risk of electric shock.

Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the micro- wave oven.

• For a permanently connected appliance:

The microwave oven must be connected to a grounded, metallic, permanent wiring system, or an equipment grounding conductor should be run with the circuit conductors and connected to the equipment grounding terminal or lead on the microwave oven.

SAVE THESE INSTRUCTIONS

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Over the Range Microwave Table of Contents Safety Read and follow the specific Precautions to Important Safety InstructionsFor a permanently connected appliance To reduce the risk of injury to personsFor all cord connected appliances USE Do not USE Cookware GuideCooking. Use these with care because the plastic May soften from the heat of the foodTips for Microwave Cooking CleaningControl Panel Parts and AccessoriesSee page 9 for control panel features Control Panel Features Learn about Your Microwave Oven Kitchen TimerHelp Control SET-UPVent HI/LO/OFF Light TimerLight HI/LO/OFF Table ON/OFFFavorite Recipe Easy CookHold Warm +/- MORE/LESSCooking AT Lower Power Levels Cooking AT High Power LevelExample To cook food for 7 minutes, 30 seconds at 70% power Touch power levelPower Level Microwave Output USE Cooking Guide for Lower Power LevelSensor Cooking Guide Sensor Operating InstructionsPopcorn Sensor Example To pop popcornVegetable Sensor Pizza SensorPotato Sensor Reheat Sensor Cook SensorEntree, Casserole and Rice Example To cook rice Example To reheat CasseroleDefrosting Tips Weight Conversion ChartAuto Defrost Food AT Beep Special Instructions Beef Auto Defrost ChartLamb PorkAuto Defrost Chart CONT’D USE of the TWO Position Metal Rack Time DefrostQuick Defrost Getting the Best Cooking Results Time Defrost ChartFood Time Special Instructions Meat Fish & SeafoodFish and Shellfish Fish Power Level Cooking Time DirectionsFish and Shellfish Cooking Table Cooking Fish and Shellfish General DirectionsMeat APPETIZERS/SAUCES/SOUPSCooking Time Directions Beef Meat Cooking TablePoultry Cooking Table PoultryCooking Poultry General Directions PoultryRice Power Level Cooking Time Directions Pasta Power Level Cooking Time DirectionsPasta and Rice Pasta Cooking TableCleaning the Grease Filter Care and CleaningCharcoal Filter Replacement Metal RackOven Light Replacement Cooktop Light ReplacementProblem Possible Causes Before Calling for ServiceCooking Questions and AnswersQuestion Answer

HF36V305, HF36V306 specifications

Siemens, a renowned leader in the field of industrial automation and control technology, has introduced the HF36V306 and HF36V305, two cutting-edge frequency converters designed to optimize performance in various industrial applications. These models are at the forefront of Siemens' efforts to enhance energy efficiency, precision control, and operational flexibility.

HF36V306 and HF36V305 are part of Siemens' innovative Sinamics series, renowned for delivering high-performance solutions for drive systems. Both models feature advanced technology that allows for smooth control of AC motors, significantly improving energy consumption and reducing operational costs. These frequency converters are highly versatile, suitable for applications in various sectors, including manufacturing, process automation, and building technology.

One of the standout features of the HF36V306 and HF36V305 is their ability to handle a wide range of voltage and power ratings. This flexibility makes them adaptable to different motor types and operational demands, ensuring compatibility with existing systems. Additionally, both models support a communication interface that provides seamless integration with higher-level automation systems, facilitating real-time monitoring and control.

The models are designed with advanced cooling technologies that enhance their reliability and longevity, even in tough operational environments. Their robust construction allows them to perform efficiently in temperatures ranging from -10 to +50 degrees Celsius, making them suitable for both indoor and outdoor installations.

Another key characteristic of the HF36V306 and HF36V305 is their powerful and intuitive software interface. With user-friendly programming and diagnostic tools, operators can easily configure the converters for specific applications, monitor performance metrics, and troubleshoot potential issues quickly. This ease of use extends to remote access capabilities, enabling operators to manage systems from anywhere, enhancing convenience and operational efficiency.

Both models also incorporate safety features that comply with international standards, ensuring that users can operate them with confidence. These include integrated functions like Safe Torque Off (STO) to minimize risks during maintenance and modifications.

In conclusion, Siemens’ HF36V306 and HF36V305 frequency converters present an impressive combination of advanced features, technologies, and characteristics. Their ability to deliver high performance, energy efficiency, and operational flexibility makes them a valuable solution for a variety of industrial applications, positioning Siemens as a frontrunner in the drive technology sector.
Top Page Image Contents