Spray arms
Lime and remnants of food in the washing water can block the nozzles in the spray arms 22 and 23 and the arm mountings .
Inspect the nozzles in the spray arms for blocked holes due to remnants of food.
If necessary, pull the lower arm 23 upwards and lift it off.
Unscrew the upper spray arm 22 .
Clean both spray arms under running water.
Refit the spray arms. Ensure that the lower arm has locked into place and the upper one is screwed tight.
Spray arms
en
Fault finding
Resolving minor problems yourself
Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having to call out a service engineer. Not only does this save costs, but it also means that the appliance is available for use again that much sooner. The following list of common occurrences and their remedies should help you identify the causes of most problems.
Problems ...
... when the appliance is switched on
Appliance does not start up
Fault with fuse in mains electricity supply.
Plug not inserted in wall socket. Appliance door not closed properly.
Programme button has not been pressed.
Water tap not turned on. Blocked strainer in water intake hose.
The strainer is situated in the Aquastop or
21