Hotpoint FF7190EX Installation, Positioning and connection, Leveling, Electrical connections

Page 2

Installation

GB

! Before placing your new appliance into operation

please read these operating instructions carefully. They

 

 

contain important information for safe use, for installation

 

and for care of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Leveling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the rear feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Contents Operating InstructionsPositioning InstallationPositioning and connection LevelingTo avoid a shock hazard do not insert the discarded Reversing the Doors Top Hinge Arm Top Hinge Pin Freezer Operation Knob Description of the applianceControl panel Refrigerator Operation KnobBottle shelf Overall viewControl panel Freezer compartment AccessoriesRefrigerator compartment ICE Care trayStart-up and use Using the refrigerator to its full potentialUsing the freezer to its full potential Starting the applianceCleaning the appliance Maintenance and careSwitching the appliance off Holiday functionDisposal Precautions and tipsGeneral safety Respecting and conserving the environmentMalfunctions TroubleshootingPossible causes / Solutions Guarantee GuaranteeAfter Sales Service Hotpoint ServicePage 195071867.04
Related manuals
Manual 16 pages 52.53 Kb

FF7190EP, FF7190AEX, FF7190EX, FF7190AEP specifications

The Hotpoint FF7190EP and FF7190EX are standout models in the world of refrigerators, combining elegance with advanced technology for modern kitchens. Both models feature a sleek design that not only looks great but also offers practical functionality to accommodate various lifestyle needs.

One of the key highlights of these refrigerators is the No Frost technology, which eliminates the need for manual defrosting. This technology circulates cold air evenly throughout the appliance, preventing the build-up of frost and ensuring that food remains at optimal freshness. As a result, users can enjoy more storage space and less hassle with maintenance.

The Hotpoint FF7190EP and FF7190EX are equipped with an excellent energy efficiency rating, helping consumers save on electricity bills while also being environmentally friendly. With their A++ energy rating, these models demonstrate Hotpoint's commitment to sustainability and energy conservation.

These refrigerators come with a spacious total capacity, making them suitable for families of all sizes. The adjustable shelving allows users to customize the interior space to fit larger or odd-shaped items, which is particularly useful when storing bulky food items or large containers. Moreover, the dedicated fruit and vegetable drawers feature moisture control, helping keep produce fresher for longer.

Temperature stability is another critical feature of the FF7190EP and FF7190EX models. They are designed to maintain consistent temperatures throughout the appliance, providing users with peace of mind that their food will remain safe and flavorful. Additionally, the models come equipped with an electronic control system that makes it easy to monitor and adjust settings as needed.

Safety is prioritized in these refrigerators, with features such as the re-engineered door hinges that ensure smooth operation without compromising on style. The interior LED lighting brightens every corner of the fridge, making it easy to locate items without using additional power or generating heat.

In conclusion, the Hotpoint FF7190EP and FF7190EX represent the perfect blend of form and function, making them an excellent choice for anyone looking to upgrade their kitchen appliances. With cutting-edge technology, ample storage space, and energy efficiency, these refrigerators are sure to meet the needs of any household while enhancing the overall kitchen experience.
Top Page Image Contents