Hotpoint FF4DX(UK), FF4DK(UK) manual Installation, Positioning and connection

Page 2

Installation

GB

! Before placing your new appliance into operation

please read these operating instructions carefully. They

 

contain important information for safe use, for installation

 

and for care of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

 

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 12 cm between the sides and any furniture/side walls.

4.Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

5.In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Levelling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

The appliance is earthed and the plug is compliant with the law.

The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Connection of the water supply

To carry this out, use the kit provided which contains all the necessary elements for connection to the water supply.

To improve the performance of the Aqua Care, we recommend that you fit a tap with a filter on the pipe for the connection to the water system: in this way it will be possible to manually interrupt the water supply during long periods in which Aqua Care is not used.

!The water pressure inside the water system must be between 0.8 bar and 8 bar.

!The appliance must only be connected to a water supply suitable for drinking.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

2

Image 2
Contents Operating Instructions REFRIGERATOR/FREEZER CombinationInstallation Positioning and connectionDisposing of the plug Description of the appliance Control panelOverall view Starting the appliance Using the refrigerator to its full potentialStart-up and use Chiller systemUsing the freezer to its full potential ICE DeviceMaintenance and care Disposal Precautions and tipsGeneral safety Respecting and conserving the environmentMalfunctions TroubleshootingPossible causes / Solutions Guarantee After Sales Service

FF4DK(UK), FF4DX(UK) specifications

The Hotpoint FF4DX(UK) and FF4DK(UK) are innovative refrigeration solutions designed for the modern kitchen, combining style, functionality, and advanced technology. These models cater to the needs of families and individuals who seek efficient storage solutions without compromising on aesthetics or performance.

The Hotpoint FF4DX(UK) features a sleek stainless-steel finish, making it a contemporary addition to any kitchen decor. Its generous capacity allows for optimal organization of food and beverages, with an array of adjustable shelves and spacious compartments. The appliance is equipped with a multi-flow cooling system that ensures even distribution of cold air throughout the fridge, keeping food fresher for longer.

The FF4DK(UK), on the other hand, boasts a classic white finish that complements a variety of kitchen styles. Its practical design includes several drawers and shelves that maximize storage space while maintaining easy access to items. Both models benefit from Hotpoint's No Frost technology, which eliminates ice build-up, making defrosting a thing of the past. This feature not only saves time but also enhances energy efficiency, ensuring that the units operate at optimal performance.

Another standout characteristic is the Smart Control feature, which enables users to manage the fridge's temperature settings from a distance using a mobile app. This technology allows for customization based on personal preferences, ensuring that perishable items are stored under ideal conditions.

Energy efficiency is paramount in both the FF4DX(UK) and FF4DK(UK), as they are designed to minimize electricity consumption while delivering excellent cooling performance. With energy ratings that meet or exceed industry standards, these models contribute to a more sustainable lifestyle.

Safety and convenience are also key considerations in the design of these refrigeration units. The shelves are constructed from tempered glass, ensuring both durability and resistance to accidental spills. Additionally, the units feature an internal water dispenser for easy access to chilled water without the need for plumbing.

In summary, the Hotpoint FF4DX(UK) and FF4DK(UK) are exemplary models of modern refrigeration, offering advanced features such as multi-flow cooling, No Frost technology, and Smart Control. With their stylish designs, energy efficiency, and user-friendly characteristics, they make an excellent choice for anyone looking to upgrade their kitchen appliances. These refrigerators are a testament to Hotpoint's commitment to innovation and customer satisfaction, ensuring that they meet the demands of today’s consumers.