Hotpoint FF4DK(UK), FF4DX(UK) manual Precautions and tips, General safety, Disposal

Page 9

Precautions and tips

!The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.

This appliance complies with the following

Community Directives:

-73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03.05.89 (Electromagnetic

Compatibility) and subsequent amendments; - 2002/96/CE..

General safety

The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use.

The appliance must be used to store and freeze food products by adults only and according to the instructions in this manual.

The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms.

Do not touch the appliance with bare feet or with wet or moist hands and feet.

Do not touch the internal cooling elements: this could cause skin abrasions or frost/freezer burns.

When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable.

Before cleaning and maintenance, always switch off the appliance and disconnect it from the electrical supply. It is not sufficient to set the temperature adjustment knobs on OFF (appliance off) to eliminate all electrical contact.

In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance.

Do not use utensils other than the scraper provided, or electrical equipment which is not of the type specified by the manufacturer, inside the frozen food storage compartments.

Do not put ice cubes taken directly from the freezer into your mouth.

Do not allow children to tamper with the controls or play with the appliance. Under no circumstance should they be allowed to sit on the bins or to hang from the door.

Keep packaging material out of the reach of children! It can become a choking or suffocation hazard.

When closing the refrigerator doors, pay attention to the position of the upright (see figure).

Make sure that excessive

volumes of food are not placed in the upper part of the freezer compartment, in the space reserved for the ice tray (where present).

Disposal

GB

Observe local environmental standards when disposing packaging material for recycling purposes.

The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

Respecting and conserving the environment

Install the appliance in a fresh and well-ventilated room. Ensure that it is protected from direct sunlight and do not place it near heat sources.

Try to avoid keeping the door open for long periods or opening the door too frequently in order to conserve energy.

Do not fill the appliance with too much food:

cold air must circulate freely for food to be preserved properly. If circulation is impeded, the compressor will work continuously.

Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy.

Defrost the appliance if ice forms (see Maintenance). A thick layer of ice makes cold transference to food products more difficult and results in increased energy consumption.

Regularly check the door seals and wipe clean to ensure they are free of debris and to prevent cold air from escaping (see Maintenance).

9

Image 9
Contents REFRIGERATOR/FREEZER Combination Operating InstructionsPositioning and connection InstallationDisposing of the plug Control panel Description of the applianceOverall view Start-up and use Using the refrigerator to its full potentialStarting the appliance Chiller systemICE Device Using the freezer to its full potentialMaintenance and care General safety Precautions and tipsDisposal Respecting and conserving the environmentTroubleshooting Possible causes / SolutionsMalfunctions Guarantee After Sales Service

FF4DK(UK), FF4DX(UK) specifications

The Hotpoint FF4DX(UK) and FF4DK(UK) are innovative refrigeration solutions designed for the modern kitchen, combining style, functionality, and advanced technology. These models cater to the needs of families and individuals who seek efficient storage solutions without compromising on aesthetics or performance.

The Hotpoint FF4DX(UK) features a sleek stainless-steel finish, making it a contemporary addition to any kitchen decor. Its generous capacity allows for optimal organization of food and beverages, with an array of adjustable shelves and spacious compartments. The appliance is equipped with a multi-flow cooling system that ensures even distribution of cold air throughout the fridge, keeping food fresher for longer.

The FF4DK(UK), on the other hand, boasts a classic white finish that complements a variety of kitchen styles. Its practical design includes several drawers and shelves that maximize storage space while maintaining easy access to items. Both models benefit from Hotpoint's No Frost technology, which eliminates ice build-up, making defrosting a thing of the past. This feature not only saves time but also enhances energy efficiency, ensuring that the units operate at optimal performance.

Another standout characteristic is the Smart Control feature, which enables users to manage the fridge's temperature settings from a distance using a mobile app. This technology allows for customization based on personal preferences, ensuring that perishable items are stored under ideal conditions.

Energy efficiency is paramount in both the FF4DX(UK) and FF4DK(UK), as they are designed to minimize electricity consumption while delivering excellent cooling performance. With energy ratings that meet or exceed industry standards, these models contribute to a more sustainable lifestyle.

Safety and convenience are also key considerations in the design of these refrigeration units. The shelves are constructed from tempered glass, ensuring both durability and resistance to accidental spills. Additionally, the units feature an internal water dispenser for easy access to chilled water without the need for plumbing.

In summary, the Hotpoint FF4DX(UK) and FF4DK(UK) are exemplary models of modern refrigeration, offering advanced features such as multi-flow cooling, No Frost technology, and Smart Control. With their stylish designs, energy efficiency, and user-friendly characteristics, they make an excellent choice for anyone looking to upgrade their kitchen appliances. These refrigerators are a testament to Hotpoint's commitment to innovation and customer satisfaction, ensuring that they meet the demands of today’s consumers.