Replacing fuse covers, Replacement fuse covers

ELECTRICAL CONNECTION

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

Fitting a new plug

IMPORTANT:

WIRES IN THE MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE...

Green and Yellow	-	Earth
Blue	-	Neutral
Brown	-	Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

-Connect Green and Yellow wire to terminal marked 'E' or or coloured Green and Yellow.

-Connect Brown wire to terminal marked 'L' or coloured red or brown.

-Connect Blue wire to terminal marked 'N' or coloured Black or Blue.

If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse. A 15amp plug must be protected by a 15amp fuse, either in the plug or adaptor or at the distribution board.

If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

CE Marking certifies that this appliance conforms to the following EEC directives :

Low Voltage Equipment - 73/23/EEC & 93/68 EEC

Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC

HT232I specifications

The Hotpoint HT232I is an exceptional built-in oven that combines versatility, efficiency, and modern cooking technologies. Designed for home cooks and culinary enthusiasts alike, this appliance reflects Hotpoint's commitment to quality and innovation.

One of the standout features of the HT232I is its multifunctional capability, offering several cooking modes to cater to diverse culinary needs. The oven includes conventional, fan-assisted, and grill settings, ensuring that users can prepare a variety of dishes, from perfectly baked pastries to succulent roasted meats. The fan-assisted convection feature circulates heat evenly throughout the cavity, resulting in consistent cooking and browning.

Another impressive characteristic of the HT232I is its energy efficiency. Rated A for energy performance, this oven is designed to consume less electricity while delivering top-tier cooking results. This not only helps in reducing energy bills but also minimizes the environmental impact, making it a responsible choice for eco-conscious households.

The Hotpoint HT232I also boasts an intuitive digital display and control panel, allowing for easy navigation of settings and precise temperature adjustments. The user-friendly interface provides clear instructions and feedback, making it accessible even for novice cooks. Additionally, the oven's programmable timer ensures that meals can be set to cook automatically, allowing users to multitask in the kitchen or attend to other responsibilities without worry.

Cleaning is made simple with the incorporation of catalytic liners within the oven cavity. These self-cleaning surfaces absorb grease and spills during the cooking process, reducing the need for tough scrubbing and making maintenance hassle-free. The oven also features removable accessories, ensuring that every component can be easily cleaned.

In terms of design, the HT232I is sleek and modern, featuring a stainless steel finish that complements various kitchen styles. Its built-in configuration allows for seamless integration into cabinetry, providing a polished look that enhances the overall aesthetic of the kitchen.

With its blend of innovative technology, efficiency, and appealing design, the Hotpoint HT232I is an outstanding choice for anyone looking to upgrade their cooking experience. This oven not only meets but often exceeds the expectations of those who demand reliability and performance in their cooking appliances.