Troubleshooting, Abnormal freezer heating alarm

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

Malfunctions:

Possible causes / Solutions:

The display does not illuminate.

The motor does not start.

The refrigerator and the freezer do not cool well.

•The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house.

•The appliance comes with a motor protection control (see Start-up and use).

•The doors do not close properly or the seals are damaged.

•The doors are opened too frequently.

•The OPERATION knobs are not on the correct setting (see Description).

•The refrigerator or the freezer have been over-filled.

The food inside the refrigerator is • The REFRIGERATOR OPERATION knob is not on the correct setting

beginning to freeze.(see Description).

• The food is in contact with the back inside wall of the refrigerator.

The motor runs continuously. • The SUPER COOL and/or SUPER FREEZE and/or ICE PARTY functions are enabled (see Description).

•The door is not closed properly or is continuously opened.

•The outside ambient temperature is very high.

The appliance makes a lot of noise.

There is water at the bottom of the refrigerator.

Door open alarm

•The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.

•The water discharge hole is blocked (see Maintenance).

Should the refrigerator door be left open for more than two minutes, the lamp inside the compartment will begin to flash; after a few seconds, an alarm buzzer is sounded. To silence this buzzer, just shut the door or press the SELECT button. Should the door remain open for more than 4 minutes, the lamp will flash more rapidly.

Abnormal freezer heating alarm	a) To signal an excessive heating on the part of the freezer (e.g. momentary
	power failure), a buzzer will sound and a message comes up on the
	display “A1” to signal the dangerous heating of the compartment. To
	prevent food from refreezing, the freezer will try to maintain a temperature
	of 0°C, thus allowing you to use up the food within 24 hours or to cook
	them and then refreeze them. You can turn the buzzer off simply by
	pressing the SELECT button.

To return to normal operation and cancel the message from the display, you need to turn the appliance off and on again, turning the appliance FREEZER OPERATION and APPLIANCE ON/OFF Knob.

b)If the temperature inside the freezer continues to rise to excessively high values, the buzzer will sound yet again and another message “A2” will

come up on the display to signal the dangerous state of overheating. We recommend you check the conditions of the food, as it may be necessary to throw it away. In all cases, food should not be refrozen unless you cook it first. To prevent food from refreezing, the freezer will try to maintain a

temperature of 0°C. The buzzer can be turned off by simply pressing the SELECT button. To return to normal operation and cancel the message

from the display, you need to turn the appliance off and on again, turning the appliance FREEZER OPERATION and APPLIANCE ON/OFF Knob.

HME35 specifications

The Hotpoint HME35 is a versatile and innovative microwave oven designed to meet the demands of modern kitchens while providing convenience and efficiency. This appliance boasts an array of features and technologies that make it a popular choice among consumers who seek quality and performance.

One of the standout characteristics of the Hotpoint HME35 is its spacious interior. With a generous capacity, it allows users to cook or reheat larger dishes with ease, accommodating everything from family meals to party platters. The turntable ensures even cooking and heating, making it a reliable option for various culinary tasks.

The HME35 incorporates advanced cooking technologies such as 3D wave technology, which provides consistent heat distribution throughout the cooking chamber. This innovation ensures that food is evenly cooked, eliminating cold spots and resulting in perfectly heated meals every time. Additionally, it offers multiple power settings, allowing users to customize cooking times and temperatures to achieve optimal results for different types of food.

Another notable feature is the integrated grill function. This dual cooking capability allows users to combine microwave and grilling techniques, providing a wider range of cooking options. Whether it's crisping up a pizza or browning the top of a casserole, the grill function enhances the versatility of this microwave.

The user-friendly interface on the Hotpoint HME35 simplifies operation. The intuitive controls and LED display make it easy to select cooking modes, power levels, and timing adjustments. Furthermore, many models come with pre-programmed auto-cook settings, taking the guesswork out of meal preparation by automatically determining the optimal time and power for specific foods.

Energy efficiency is another important aspect of the Hotpoint HME35. Designed to minimize power consumption while maximizing performance, it contributes to lower energy bills and supports environmentally conscious living. The appliance also features a sleek exterior design that can complement any kitchen décor, with options for various finishes to match individual styles.

In summary, the Hotpoint HME35 combines functionality, style, and cutting-edge technology, making it an excellent addition to any home. Its spacious interior, 3D wave technology, dual cooking capabilities, user-friendly interface, and energy efficiency set it apart as a reliable and versatile kitchen appliance. Whether you're reheating leftovers or cooking a complete meal, the Hotpoint HME35 is equipped to handle it all with ease.