Hotpoint HME35 manual Installation, Positioning and connection, Electrical connections

Page 4

Installation

 

! Before operating your new appliance, please read

GB

 

these operating instructions carefully. They contain

 

important information for safe use, installation and care

 

 

of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

 

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the rear fan grills. The compressor

and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Ensure the appliance is far away from any sources of heat (direct sunlight, electric stove, etc.).

Electrical connections

After transportation of the appliance, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Instructions for Installation and Use Retention of this Instruction Book Operating Instructions REFRIGERATOR/FREEZER CombinationInstallation Positioning and connectionPositioning Electrical connectionsFitting a new plug Description of the appliance Control panelOverall view Start-up and use Starting the applianceFreezer compartment Refrigerator compartmentUsing the display Using the refrigerator to its full potentialUsing the freezer to its full potential Maintenance and care Switching the appliance offCleaning the appliance Avoiding mould and unpleasant odoursDefrosting the appliance Replacing the light bulbDefrosting the refrigerator compartment Defrosting the freezer compartmentPrecautions and tips General safetyDisposal Respecting and conserving the environmentTroubleshooting Malfunctions Possible causes / SolutionsAbnormal freezer heating alarm Beginning to freeze.see DescriptionCommunicating AssistanceModel Page Page After Sales Service Guarantee Key Contacts

HME35 specifications

The Hotpoint HME35 is a versatile and innovative microwave oven designed to meet the demands of modern kitchens while providing convenience and efficiency. This appliance boasts an array of features and technologies that make it a popular choice among consumers who seek quality and performance.

One of the standout characteristics of the Hotpoint HME35 is its spacious interior. With a generous capacity, it allows users to cook or reheat larger dishes with ease, accommodating everything from family meals to party platters. The turntable ensures even cooking and heating, making it a reliable option for various culinary tasks.

The HME35 incorporates advanced cooking technologies such as 3D wave technology, which provides consistent heat distribution throughout the cooking chamber. This innovation ensures that food is evenly cooked, eliminating cold spots and resulting in perfectly heated meals every time. Additionally, it offers multiple power settings, allowing users to customize cooking times and temperatures to achieve optimal results for different types of food.

Another notable feature is the integrated grill function. This dual cooking capability allows users to combine microwave and grilling techniques, providing a wider range of cooking options. Whether it's crisping up a pizza or browning the top of a casserole, the grill function enhances the versatility of this microwave.

The user-friendly interface on the Hotpoint HME35 simplifies operation. The intuitive controls and LED display make it easy to select cooking modes, power levels, and timing adjustments. Furthermore, many models come with pre-programmed auto-cook settings, taking the guesswork out of meal preparation by automatically determining the optimal time and power for specific foods.

Energy efficiency is another important aspect of the Hotpoint HME35. Designed to minimize power consumption while maximizing performance, it contributes to lower energy bills and supports environmentally conscious living. The appliance also features a sleek exterior design that can complement any kitchen décor, with options for various finishes to match individual styles.

In summary, the Hotpoint HME35 combines functionality, style, and cutting-edge technology, making it an excellent addition to any home. Its spacious interior, 3D wave technology, dual cooking capabilities, user-friendly interface, and energy efficiency set it apart as a reliable and versatile kitchen appliance. Whether you're reheating leftovers or cooking a complete meal, the Hotpoint HME35 is equipped to handle it all with ease.
Top Page Image Contents