Product Safety, Installation | Hotpoint HMT40 specs

PRODUCT SAFETY

ATTENTION

Read your manual carefully since it contains instructions which will ensure safe installation, use and maintenance of your appliance.

Your Refrigerator is built to International safety standards (EN60) and has been awarded the European approval mark (IMQ) for compliance with UK electrical safety requirements. It also meets the EC standards on the prevention and elimi- nation of radio interference (EC directive 87/308 - 02.06.89).

1.This appliance must not be installed outdoors - not even in an area protected by a roof. It is extremely dangerous to leave it exposed to rain or storms.

2.It must only be used by adults and exclusively to refriger- ate and freeze foodstuffs, following the instructions for use contained in this manual.

3.Do not ever touch or handle the appliance with bare feet or with wet hands or feet.

4.It is highly recommended that you do not use extension cords or multiple socket adapters. If the refrigerator is installed between cabinets, make sure that the cord is not bent or dangerously pinched or compressed.

5.Never pull on the cord or the refrigerator to remove the plug from the wall socket - this is very dangerous.

6.Never touch the cooling components within the appliance, especially with wet hands because this could result in injury.

7.Never put ice cubes just removed from the freezer into your mouth because they could stick to your mouth and cause burns.

8.Never perform any cleaning or maintenance operations without first unplugging the appliance. Setting the appliance ON/OFF control to OFF is not enough to cut off all electrical contacts.

9.Before having your old refrigerator picked up for disposal, remove or make inoperable any locking devices to prevent children who might play in or around the appliance from be- ing locked inside.

10.Before calling for service/assistance in the case of mal- function, consult the chapter entitled “TROUBLESHOOTING" to determine whether it is possible to eliminate the problem. Do not try to repair the problem by trying to access the inter- nal components of the appliance.

11.If damaged, the power supply cord on this appliance must be replaced by our service centre because special tools are required for replacement.

12.Do not use electric appliances inside the compartment for food storage, if these are not those recommended by the manufacturer.

13.At the end of the functional life of your appliance – containing cyclopentane gas in the insulation foam and perhaps gas R600a (isobutane) in the refrigeration circuit – the latter should made safe before being sent to the dump. For this operation, please contact your dealer or the Local Organisation in charge of waste disposal.

INSTALLATION

To ensure that the appliance operates properly and to reduce energy consumption, it is important that the ap- pliance is installed correctly.

Ventilation

The compressor and condenser generate heat and, therefore, need to be ventilated properly. Avoid placing the appliance in direct sunlight, or next to an electric stove or similar appliance. Areas not adequately ventilated are not suitable for this appliance.

During installation, make sure not to cover or obstruct the grates that allow for proper ventilation of the appliance.

For proper ventilation of the appliance, you must leave:

-at least 10cm from top of appliance to underside of any cabinets above it.

-at least 5cm at the sides of the appliance to any adjacent cabinets/walls.

Away from Heat

Avoid positioning the appliance in a place where it is directly exposed to sunlight or near an oven, hob or the like.

Level

The appliance must be level. If the floor is not level, use the front adjustable feet to level the appliance.

Electrical Connection and Earthing

Before proceeding with the electrical connection, make sure that the voltage indicated on the rating plate, located within the fridge (bottom lefthand side), corresponds to the mains voltage in your home and that the socket is fitted with a stand- ard earthing wire in accordance with safety standards for 46/ 90 systems. If the socket is not fitted with an earthing wire, the manufacturer will not be held liable for any damages and/or injuries arising out of the use of the appliance. Do not use multiple sockets or adapters.

Position the appliance in such a way that you can access the socket where it is plugged in.

Insufficient power?

The electrical socket must be able to handle the maximum power load of the appliance, which is indicated on the rating plate located within the freezer.

Before making the electrical connection ...

After the appliance has been delivered, place it in the vertical upright position and wait at least 3 hours before inserting the plug into the socket in order to ensure that it functions prop- erly.

HMT40 specifications

The Hotpoint HMT40 is a versatile and compact microwave oven that exemplifies modern kitchen convenience and functionality. Designed to meet the cooking needs of today’s households, this model presents a range of features and technologies aimed at providing efficiency and ease of use.

One of the standout features of the Hotpoint HMT40 is its 800 watts of power, which enables quick and efficient cooking, reheating, and defrosting. This power output ensures that meals can be prepared in less time while retaining essential flavors and nutrients. The 20-liter capacity makes it suitable for small families or individuals, allowing for the cooking of various dishes without consuming too much space on your countertop.

The microwave comes equipped with a user-friendly control panel that offers an array of preset cooking programs. These settings not only simplify the cooking process but also take the guesswork out of timing and temperature for common dishes like popcorn, pizza, and baked potatoes. This feature is particularly beneficial for those who may not be as experienced in the kitchen, as it provides a quick and straightforward method to achieve perfectly cooked meals.

In terms of design, the Hotpoint HMT40 boasts a sleek and modern aesthetic, featuring a clean white or black finish that seamlessly integrates into any kitchen décor. Its compact size does not compromise functionality, making it ideal for kitchens with limited space. Additionally, this model has a removable glass turntable, which facilitates even cooking and easy cleaning.

The Hotpoint HMT40 also incorporates advanced safety features, such as a child lock function, ensuring that families with young children can use the appliance securely. The presence of a timer and a cooking end signal further enhances the user experience, allowing for precise cooking times and the prevention of overcooking.

Moreover, the microwave's efficient energy consumption is another attractive aspect, making it an eco-friendly choice for the environmentally conscious consumer. In summary, the Hotpoint HMT40 stands out as a practical appliance that combines power, ease of use, and safety, making it a worthy addition to any kitchen. With its blend of features and stylish design, it caters to the demands of modern cooking while ensuring that users enjoy both convenience and reliability.